Skroutz.cy

Ptg Drill Carbide with Cylindrical Shank for Metal 2mm
Drills

Ptg Drill Carbide with Cylindrical Shank for Metal 2mm Code: 296530200

The Ptg carbide drill bit has a cylindrical shank and a 118º point angle. It is suitable for drilling holes in cast steel, cast iron, chilled cast iron, manganese steel, bronze and non-ferrous metals,...

The Ptg carbide drill bit has a cylindrical shank and a 118º point angle. It is suitable for drilling holes in cast steel, cast iron, chilled cast iron, manganese steel, bronze and non-ferrous metals, as well as for machining abrasive materials.

It is also used with AlSi alloys, fibre-reinforced plastics and other thermosetting materials.

  • Quantity: 1
  • Drill...
See full description See full description

Top specs

See all
  • Drilling Material Metal

  • Drill Bit Shank

    Cylindrical

    It has a round shank and fits all drills with three-jaw chucks (manual or automatic).
  • Diameter 2 mm
9 00 €
Delivery Tuesday, 10 November
4,50 € shipping cost
Sent from Greece
From Ergaliothiki 5.0 (7)
5.0 (7 reviews)
Greece
10 pieces
See Power Tool Accessories on the page of Ergaliothiki

Shop selection criteria

Why do we recommend buying from this shop?

We don’t only look at the price. We weigh different factors to find an offer that combines a good price, fast delivery and a reliable purchase.

  • Product price

    We calculate the total price you will pay and any discounts available from the shop.

  • Shipping & delivery time

    We check how quickly the product can be shipped and when you will receive it, based on your address.

  • Shop reliability

    We look at how often shops complete their orders successfully and how consistently they serve their customers.

  • Official reseller

    Where available, we take into account whether the shop is an official reseller of the brand.
What if it breaks?

You're covered by the statutory 2-year warranty. Contact us and we'll handle the entire process with the store, ensuring your issue is resolved with prompt support through a repair, replacement, or refund. Learn more

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Learn more about invoicing

Reviews (11)

Reviews

5.0
11
5.0
Review this product
  1. 11
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • Andreas_Ap
    5
    Andreas_Ap

    Verified purchase

    This review is about the diameter: 4 mm

    Expensive price indeed but it is made of solid carbide. They come in individual cases. They drill metal as if it were frozen butter. Be careful with the rotational speed, vibrations, and drilling pressure under Φ 4mm because they break. This is not a problem with the quality of the drill but with the carbide itself because it is very hard. Personally, I use low speeds with these. Regarding the heat from friction, if you are a bit careful, it rises slowly and controllably due to the difference in hardness between the drill and the metal.

    Translated from Greek ·
    Did you find this review helpful?
  • 5
    a_agagiotis

    Verified purchase

    This review is about the diameter: 3 mm

    Perfect little drill... where the classic HSS and cobalt stop, carbide begins...

    Translated from Greek ·
    Did you find this review helpful?
  • 5
    chatzinikolaidis

    Verified purchase

    This review is about the diameter: 1 mm

    It's a carbide! Even with a screwdriver, you can open a hole!

    Translated from Greek ·
    Did you find this review helpful?
  • 5
    KONGIORG

    Verified purchase

    This review is about the diameter: 2.5 mm

  • 5
    sundy_p

    Verified purchase

    This review is about the diameter: 4 mm

  • 5
    Γιαννης Δουνδουλακης

    Verified purchase

    This review is about the diameter: 3 mm

  • 5
    Savvas_Tsalgatidis

    Verified purchase

    This review is about the diameter: 3 mm

  • 5
    Savvas_Tsalgatidis

    Verified purchase

    This review is about the diameter: 3.5 mm

  • 5
    Savvas_Tsalgatidis

    Verified purchase

    This review is about the diameter: 2.5 mm

  • 5
    Savvas_Tsalgatidis

    Verified purchase

  • 5
    PanosLaert

    Verified purchase

    This review is about the diameter: 3 mm

  • Andreas_Ap
    5
    Andreas_Ap

    Expensive price indeed but it is made of solid carbide. They come in individual cases. They drill metal as if it were frozen butter. Be careful with the rotational speed, vibrations, and drilling pressure under Φ 4mm because they break. This is not a problem with the quality of the drill but with the carbide itself because it is very hard. Personally, I use low speeds with these. Regarding the heat from friction, if you are a bit careful, it rises slowly and controllably due to the difference in hardness between the drill and the metal.

    Translated from Greek ·
    0
  • 5
    a_agagiotis

    Perfect little drill... where the classic HSS and cobalt stop, carbide begins...

    Translated from Greek ·
    0
  • 5
    chatzinikolaidis

    It's a carbide! Even with a screwdriver, you can open a hole!

    Translated from Greek ·
    0
  • 5
    KONGIORG

    0
  • 5
    sundy_p

    0
  • See all
Questions
Product report

Description & Specifications

The Ptg carbide drill bit has a cylindrical shank and a 118º point angle. It is suitable for drilling holes in cast steel, cast iron, chilled cast iron, manganese steel, bronze and non-ferrous metals, as well as for machining abrasive materials.

It is also used with AlSi alloys, fibre-reinforced plastics and other thermosetting materials.

  • Quantity: 1
  • Drill bit material: Carbide
  • Drilling material: Metal
  • Shank: Cylindrical
  • Diameter: 2 mm
  • Standard: DIN6539
  • Direction of rotation: Clockwise
  • Point angle: 118º

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
296530200
Drill Material
Carbide
Suitable for
Metal
Drill Top
Cylindrical

Drill Top

Cylindrical
It has a round shank and fits all drills with three-jaw chucks (manual or automatic).
Set with Tips
No
Pieces
1 pcs
Diameter
2 mm

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (11)

5.0
11
5.0
Review this product
  1. 11
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • Andreas_Ap
    5
    Andreas_Ap

    Verified purchase

    This review is about the diameter: 4 mm

    Expensive price indeed but it is made of solid carbide. They come in individual cases. They drill metal as if it were frozen butter. Be careful with the rotational speed, vibrations, and drilling pressure under Φ 4mm because they break. This is not a problem with the quality of the drill but with the carbide itself because it is very hard. Personally, I use low speeds with these. Regarding the heat from friction, if you are a bit careful, it rises slowly and controllably due to the difference in hardness between the drill and the metal.

    Translated from Greek ·
    Did you find this review helpful?
  • 5
    a_agagiotis

    Verified purchase

    This review is about the diameter: 3 mm

    Perfect little drill... where the classic HSS and cobalt stop, carbide begins...

    Translated from Greek ·
    Did you find this review helpful?
  • 5
    chatzinikolaidis

    Verified purchase

    This review is about the diameter: 1 mm

    It's a carbide! Even with a screwdriver, you can open a hole!

    Translated from Greek ·
    Did you find this review helpful?
  • 5
    KONGIORG

    Verified purchase

    This review is about the diameter: 2.5 mm

  • 5
    sundy_p

    Verified purchase

    This review is about the diameter: 4 mm

  • 5
    Γιαννης Δουνδουλακης

    Verified purchase

    This review is about the diameter: 3 mm

  • 5
    Savvas_Tsalgatidis

    Verified purchase

    This review is about the diameter: 3 mm

  • 5
    Savvas_Tsalgatidis

    Verified purchase

    This review is about the diameter: 3.5 mm

  • 5
    Savvas_Tsalgatidis

    Verified purchase

    This review is about the diameter: 2.5 mm

  • 5
    Savvas_Tsalgatidis

    Verified purchase

  • 5
    PanosLaert

    Verified purchase

    This review is about the diameter: 3 mm

  • Andreas_Ap
    5
    Andreas_Ap

    Expensive price indeed but it is made of solid carbide. They come in individual cases. They drill metal as if it were frozen butter. Be careful with the rotational speed, vibrations, and drilling pressure under Φ 4mm because they break. This is not a problem with the quality of the drill but with the carbide itself because it is very hard. Personally, I use low speeds with these. Regarding the heat from friction, if you are a bit careful, it rises slowly and controllably due to the difference in hardness between the drill and the metal.

    Translated from Greek ·
    0
  • 5
    a_agagiotis

    Perfect little drill... where the classic HSS and cobalt stop, carbide begins...

    Translated from Greek ·
    0
  • 5
    chatzinikolaidis

    It's a carbide! Even with a screwdriver, you can open a hole!

    Translated from Greek ·
    0
  • 5
    KONGIORG

    0
  • 5
    sundy_p

    0
  • See all
9,00 €
4,50 €   shipping cost