Vitex Velatura primer is a white, matte, solvent-based alkyd primer. It prepares wooden surfaces for finishing with Vitex water- or solvent-based enamel and can be applied with a roller, brush, or airless spray gun.
Apply one or two coats. Once completely dry, sand the surface and remove the dust before applying the enamel. For application with a roller or brush, dilute by 3% with Brush Thinner T 300. For application with an airless spray gun, dilute by 3% with Spray Gun Thinner T 350.
- Type: Primer
- Colour: White
- Finish: Matte
- Composition: Alkyd, solvent-based
- Application surface: Wood
- Use: Interior
- Volume: 0.375 L
- Coats: 1 or 2
- Application method: Roller, brush, or airless spray gun
- Dilution for roller or brush: 3% with Brush Thinner T 300
- Dilution for airless spray gun: 3% with Spray Gun Thinner T 350
- Touch dry: 2–3 hours
- Recoat: After 16–18 hours
- Application temperature: From 5 °C to 35 °C
- Maximum relative humidity during application: 80%
- Tool cleaning: Brush Thinner T 300, followed by soap or detergent for rollers and brushes; Spray Gun Thinner T 350 for spray guns
- Warnings: Flammable liquid and vapour; causes serious eye irritation; may cause drowsiness or dizziness, dry or cracked skin, and an allergic reaction
- Contains: Hydrocarbons, C9-C11, n-alkanes, isoalkanes, cyclics, <2% aromatics; methyl ethyl ketoxime
- Poison Control Centre: 210 7793 777
Specifications
- Genre
- Pool Ground Pad
- Surface Material
- Wood
- Surfaces
- Internal
- Properties
- Solvent-Base, Velatura
Quantity
- Mass Gaining
- 0.375 lt
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.