Vitex Anti-Rust Primer is designed for interior and exterior metal surfaces. It dries quickly and is based on a blend of modified alkyd resins. It serves as a primer for the final metal enamel coat.
Apply with a roller, brush or spray gun in one or two coats. Before application, the surface must be dry, smooth, free of dust and oil, and sanded with suitable sandpaper. After 20–24 hours, once the primer has dried completely, sand the surface again, remove the dust and paint with metal enamel.
- Type: Anti-rust primer
- Substrate: Metal
- Use: Interior and exterior
- Composition: Modified alkyd resins
- Properties: Fast-drying, anti-corrosive, with good adhesion, hiding power and flexibility
- Colour: Grey
- Coverage: 12–14 m²/L in one coat, 6–7 m²/L in two coats
- Thinning: Up to 5% with T300 thinner for roller or brush application, or with T350 thinner for spray gun application
- Touch-dry time: 45–60 minutes
- Apply topcoat: After 20–24 hours
- Application temperature: 5–35°C
- Relative humidity during application: Below 80%
- Volume: 2.5 L
Specifications
- Genre
- Primer
- Surface Material
- Metal
- Surfaces
- Multiprimer
- Properties
- Antirust
Quantity
- Mass Gaining
- 2.5 lt
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.