Vitex Anti-Rust Primer is a quick-drying primer for metal surfaces, suitable for indoor and outdoor use. It is made with modified alkyd resins and serves as a primer coat for the final metal paint. This product is grey.
Apply with a roller, brush or spray gun in one or two coats. The surface must be dry, smooth, clean and free of dust and oil, and sanded with suitable sandpaper. Thin the primer by up to 5% with T300 brush thinner for roller or brush application, or with T350 spray thinner for spray-gun application. Once fully dry, after 20–24 hours, sand the surface and remove the dust before applying the topcoat.
- Type: Anti-rust primer
- Application surface: Metal
- Use: Indoor and outdoor
- Colour: Grey
- Volume: 0.375 L
- Base: Modified alkyd resins
- Properties: Quick-drying, with anti-corrosion protection, adhesion, opacity and elasticity
- Coverage: 12–14 m²/L for one coat, 6–7 m²/L for two coats
- Touch-dry time: 45–60 minutes
- Topcoat application: After 20–24 hours
- Thinning: Up to 5% with T300 thinner for roller or brush application, or T350 thinner for spray-gun application
- Application tools: Roller, brush or spray gun
- Application temperature: 5–35 °C
- Relative humidity for application: Below 80%
- VOC content: Up to 449 g/L in the ready-to-use product
- Storage: 5–38 °C, in sealed containers and in a shaded place
- Tool cleaning: Clean rollers and brushes with T300, then with soap or detergent; clean spray guns with T350
Specifications
- Genre
- Primer
- Surface Material
- Metal
- Surfaces
- Multiprimer
- Properties
- Antirust
Quantity
- Mass Gaining
- 0.375 lt
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.