Skroutz.cy

Raider RD-SA19 Electric Pulse Sander 350W with Speed Control and with Suction System 040111
Sanders

Raider RD-SA19 Electric Pulse Sander 350W with Speed Control and with Suction System 040111

Technical Specifications

  • Power: 350W
  • Base: 115x230mm
  • No-load speed: 6000-11000min
  • Orbit diameter: 2.5mm
  • Rated voltage: 230V
  • Sandpaper size: 115x280mm
  • Dust protection
  • Power supply type: Corded
  • ...

Technical Specifications

  • Power: 350W
  • Base: 115x230mm
  • No-load speed: 6000-11000min
  • Orbit diameter: 2.5mm
  • Rated voltage: 230V
  • Sandpaper size: 115x280mm
  • Dust protection
  • Power supply type: Corded
  • Frequency: 50Hz
  • Weight: 2.41kg

Description

The RD-SA19 350W 040111 sander from Raider is a powerful tool that will assist in sanding surfaces with precision and...

See full description See full description

Top specs

  • Power

    Indicates the power of the motor.

    Higher power → stronger material removal and more effective sanding, especially on hard materials.

  • Speed Setting

    Ability to control the rotation speed of the tool.

    1

  • Oscillation Range

    Refers to the amount/length of the back-and-forth or up-and-down movement of the disc or base (greater range removes more material, smaller range provides a more precise finish).

    2.5

    General sanding, wood or paint finishing.

  • RPM (Revolutions Per Minute)

    • High speeds → fast material removal
    • Low speeds → finer, more controlled finish

  • Velcro

    The abrasive pads can be attached with Velcro (hook-and-loop fastener).

    1
  • Weight (Net) 2440 gr
  • See all
46 50 €
47 Coins 47 Coins
Delivery Fri, 04 Sep - Tue, 08 Sep
4,50 € shipping cost
Do you want it with Free shipping to Skroutz Point?
Sent from Greece
From Greek Airsoft 4.5 (10)
4.5 (10 reviews)
Greece
See Power Tools on the page of Greek Airsoft
What if it breaks?

You're covered by the statutory 2-year warranty. Contact us and we'll handle the entire process with the store, ensuring your issue is resolved with prompt support through a repair, replacement, or refund.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Learn more about invoicing
Product report

Description

Description

Technical Specifications

  • Power: 350W
  • Base: 115x230mm
  • No-load speed: 6000-11000min⁻¹
  • Orbit diameter: 2.5mm
  • Rated voltage: 230V
  • Sandpaper size: 115x280mm
  • Dust protection
  • Power supply type: Corded
  • Frequency: 50Hz
  • Weight: 2.41kg

Description

The RD-SA19 350W 040111 sander from Raider is a powerful tool that will assist in sanding surfaces with precision and efficiency. With a rated input power of 350W and adjustable speed function, it is suitable for various sanding tasks.

Key Features

  • Powerful Performance: 350W Input Power for efficient sanding.
  • Speed Adjustment: No-load speed 6000-11000min⁻¹ for customized results.
  • Dust Collection: Device with Dust Collection System for a clean workspace.
  • Maximum Vibration Deviation: Up to 2mm for effective sanding.
  • Orbit Diameter: 2.5mm for uniform results.
  • Sanding Strip Size: 115x280mm for quick work.
  • Base: 115x230mm for stability during sanding.
  • Power Supply Type: Corded 230V for safety and convenience.
  • Frequency: 50Hz for stable operation.
  • Cable Length: 2m for ease of mobility.

Weight: 2.41 kg

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Specifications

Type
Pulse Sander

Type

Pulse Sander

For smoothing large surfaces with rectangular sanding base.
Power Source
Electric

Power Source

The method of supplying power to the tool.
Oscillation Range
2.5 mm

Oscillation Range: 2.5

Refers to the amount/length of the back-and-forth or up-and-down movement of the disc or base (greater range removes more material, smaller range provides a more precise finish).


General sanding, wood or paint finishing.
Net Weight
2440 gr
Palm Sander
No

Palm Sander

Ergonomic sander that can be easily held by hand, without the need for special support or handles.

Power Specifications

Power
350 W

Power

Indicates the power of the motor.

Higher power → stronger material removal and more effective sanding, especially on hard materials.
Cable Length
2 m

Features & Functions

Dust Suction System
Yes

Dust Suction System

Used for collecting residues during the operation of the tool.
Speed Setting
Yes

Speed Setting

Ability to control the rotation speed of the tool.
Turns
11000 rpm

Turns

  • High speeds → fast material removal
  • Low speeds → finer, more controlled finish
Brushless
No

Brushless

Motor without brushes, offering greater autonomy and longer lifespan.
Water Supply
No
Soft Start
No

Soft Start

Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
Brake
No

Brake

Immediately stops the disc when the tool is switched off, for safety and easy abrasive change.
Connection with Vacuum
No

Sandpaper / Belt Specifications

Sandpaper Dimensions
230x115 mm
Velcro
Yes

Velcro

The abrasive pads can be attached with Velcro (hook-and-loop fastener).

Accessories

Carrying Case
Without
Handle Included
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (1)

Reviews

5.0
1
5.0
Review this product
  1. 1
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • 5
    TZINA_TSIRIGOTI

    Verified purchase

    The product is very good. I didn't find anything negative

    Translated from Greek ·
    Did you find this review helpful?
Questions

Questions

Do you have a question about the product?

3 users have this product and can help you

Ask for the product

Description & Specifications

Technical Specifications

  • Power: 350W
  • Base: 115x230mm
  • No-load speed: 6000-11000min⁻¹
  • Orbit diameter: 2.5mm
  • Rated voltage: 230V
  • Sandpaper size: 115x280mm
  • Dust protection
  • Power supply type: Corded
  • Frequency: 50Hz
  • Weight: 2.41kg

Description

The RD-SA19 350W 040111 sander from Raider is a powerful tool that will assist in sanding surfaces with precision and efficiency. With a rated input power of 350W and adjustable speed function, it is suitable for various sanding tasks.

Key Features

  • Powerful Performance: 350W Input Power for efficient sanding.
  • Speed Adjustment: No-load speed 6000-11000min⁻¹ for customized results.
  • Dust Collection: Device with Dust Collection System for a clean workspace.
  • Maximum Vibration Deviation: Up to 2mm for effective sanding.
  • Orbit Diameter: 2.5mm for uniform results.
  • Sanding Strip Size: 115x280mm for quick work.
  • Base: 115x230mm for stability during sanding.
  • Power Supply Type: Corded 230V for safety and convenience.
  • Frequency: 50Hz for stable operation.
  • Cable Length: 2m for ease of mobility.

Weight: 2.41 kg

Manufacturer

Manufacturer Details

Warnings & Safety Information

Specifications

Type
Pulse Sander

Type

Pulse Sander

For smoothing large surfaces with rectangular sanding base.
Power Source
Electric

Power Source

The method of supplying power to the tool.
Oscillation Range
2.5 mm

Oscillation Range: 2.5

Refers to the amount/length of the back-and-forth or up-and-down movement of the disc or base (greater range removes more material, smaller range provides a more precise finish).


General sanding, wood or paint finishing.
Net Weight
2440 gr
Palm Sander
No

Palm Sander

Ergonomic sander that can be easily held by hand, without the need for special support or handles.

Power Specifications

Power
350 W

Power

Indicates the power of the motor.

Higher power → stronger material removal and more effective sanding, especially on hard materials.
Cable Length
2 m

Features & Functions

Dust Suction System
Yes

Dust Suction System

Used for collecting residues during the operation of the tool.
Speed Setting
Yes

Speed Setting

Ability to control the rotation speed of the tool.
Turns
11000 rpm

Turns

  • High speeds → fast material removal
  • Low speeds → finer, more controlled finish
Brushless
No

Brushless

Motor without brushes, offering greater autonomy and longer lifespan.
Water Supply
No
Soft Start
No

Soft Start

Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
Brake
No

Brake

Immediately stops the disc when the tool is switched off, for safety and easy abrasive change.
Connection with Vacuum
No

Sandpaper / Belt Specifications

Sandpaper Dimensions
230x115 mm
Velcro
Yes

Velcro

The abrasive pads can be attached with Velcro (hook-and-loop fastener).

Accessories

Carrying Case
Without
Handle Included
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (1)

5.0
1
5.0
Review this product
  1. 1
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • 5
    TZINA_TSIRIGOTI

    Verified purchase

    The product is very good. I didn't find anything negative

    Translated from Greek ·
    Did you find this review helpful?
46,50 €
Free to a Skroutz Point
or   4,50 €   shipping cost