Skroutz.cy

Milwaukee M12 BDDX SET-202C Battery Drill Driver 12V 2x2Ah
Power Drill Drivers & Screwdrivers

Milwaukee M12 BDDX SET-202C Battery Drill Driver 12V 2x2Ah

The Milwaukee M12 BDDX SET-202C is a 12 V cordless drill/driver with a FIXTEC interchangeable head system. The removable chuck, metal right-angle head and metal offset head allow for different working...

The Milwaukee M12 BDDX SET-202C is a 12 V cordless drill/driver with a FIXTEC interchangeable head system. The removable chuck, metal right-angle head and metal offset head allow for different working configurations. Removing the chuck reveals a bit holder and reduces the tool’s length to 153 mm.

The REDLINK digital circuit board provides overload protection...

See full description See full description

Top specs

  • Power Supply

    Battery

    Indicates whether the tool operates on battery or directly from the mains. Battery-powered tools offer freedom of movement, while electric ones provide continuous power.
  • Number of Batteries 2

  • Speed Setting

    Ability to adjust the rotation speed according to the task (low speed for screwing, higher speed for drilling into larger walls, maximum speed for drilling into concrete)

  • Voltage

    It corresponds to the power of the tool. Higher voltage means more power and durability for heavy-duty tasks.

  • Battery Capacity

    The battery capacity. The higher the number, the longer the tool's operating time. An average continuous working time is 20-25 minutes per ah, but it always depends on the type of work we are doing.

  • Maximum Motor Speed

    The maximum rotational speed of the engine in revolutions per minute. For drilling tasks, a number of revolutions up to 1500rpm is perfectly satisfactory, as there is a risk of breaking the drill bit due to the increase in temperature above that level, while for screwing tasks higher speeds can be used, especially if the material is soft such as wood or plasterboard.

  • Chuck Diameter

    The maximum size of drill bit or tip you can use. The larger the chuck, the more accessories it fits.

  • Torque Setting

    The ability to adjust the torque of the tool's operation according to the task at hand. (Low torque for easy screwing/unscrewing, high torque for drilling into walls).
  • See all
269 99 €
You earn a 10,00 € coupon
for your next purchase

Deals & Benefits

Κέρδισε κουπόνι 10€ με αγορά μέσω App!

Το θέλεις; Θα το ‘χεις! Κάνε μια παραγγελία άνω των 50€ από το Skroutz App μέσα στο ΣΟΥΚΟΥ και κέρδισε κουπόνι 10€ για την επόμενη παραγγελία σου άνω των 50€.

Η προσφορά ισχύει μέχρι την Κυριακή, 01/11, γι' αυτό βιάσου.

  • Απαραίτητη προϋπόθεση είναι η αγορά μέσω του Skroutz App.
  • Το κουπόνι 10€ ισχύει για μία (1) παραγγελία συνολικής αξίας προϊόντων άνω των 50€ με διεύθυνση αποστολής στην Κύπρο.
  • Το κουπόνι αποδίδεται αμέσως μετά την ολοκλήρωση της παραγγελίας με διάρκεια 5 ημέρες από την ημερομηνία απόδοσής του.

Terms & conditions apply
Delivery Thursday, 05 November
Free shipping cost
Sent from Greece
From MdTools 5.0 (45)
5.0 (45 reviews)
Greece
4 pieces
See Power Tools on the page of MdTools
What if it breaks?

You're covered by the statutory 2-year warranty. Contact us and we'll handle the entire process with the store, ensuring your issue is resolved with prompt support through a repair, replacement, or refund.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Learn more about invoicing
Review the product
Product report

Description

Description

The Milwaukee M12 BDDX SET-202C is a 12 V cordless drill/driver with a FIXTEC interchangeable head system. The removable chuck, metal right-angle head and metal offset head allow for different working configurations. Removing the chuck reveals a bit holder and reduces the tool’s length to 153 mm.

The REDLINK digital circuit board provides overload protection for the tool and battery. The design includes metal planetary gears, a belt clip and an LED work light. The tool is compatible with Milwaukee M12 batteries.

  • Type: Drill/driver
  • Power source: Battery
  • Voltage: 12 V
  • Batteries: 2 M12 B2 Li-ion batteries, each with a capacity of 2 Ah
  • Charger: C12 C
  • Maximum torque: 32 Nm
  • Speeds: 2, with ranges of 0–400 rpm and 0–1,500 rpm
  • Maximum speed: 1,500 rpm
  • Chuck / Holder: Interchangeable heads, chuck up to 13 mm, and right-angle and offset holders for 1/4" hex bits
  • Drilling capacity: Up to 25 mm in wood and 10 mm in steel
  • Work light: LED
  • Weight: 1.2 kg with battery
  • Carrying case: Kitbox
  • Package contents: Removable FIXTEC chuck, right-angle and offset heads, belt clip and 25 mm PZ2 bits

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Details

Type
Drill Driver

Type

Drill Driver

Suitable for screwing-unscrewing and drilling holes in wood, metal, and various building materials.
Power Source
Battery

Power Source

Battery
Indicates whether the tool operates on battery or directly from the mains. Battery-powered tools offer freedom of movement, while electric ones provide continuous power.
Brushless
No

Brushless

The advantage that brushless motors have over brushed ones is that they do not have friction since there are no carbon brushes. Without carbon brushes, the motors are more efficient and have a longer lifespan as there is no wear (the carbon brushes in brushed motors wear out with use). They produce less noise, maintain constant torque at all speeds, do not overheat, and require no maintenance.

Battery Features

Number of Batteries
2
Battery Voltage
12 V

Battery Voltage

It corresponds to the power of the tool. Higher voltage means more power and durability for heavy-duty tasks.
Battery Capacity
2 Ah

Battery Capacity

The battery capacity. The higher the number, the longer the tool's operating time. An average continuous working time is 20-25 minutes per ah, but it always depends on the type of work we are doing.
Secondary Battery Charge Ah
2 Ah
Compatible Battery Type
Milwaukee M12

Compatible Battery Type

The type of battery that can be installed in the tool.

Drilling Abilities

Steel Ø
10 mm

Steel Ø

The maximum possible drilling diameter in metal. The most common diameter for household screws is 6-8mm.
Wood Ø
25 mm

Features & Functions

Maximum Motor Speed
1500 rpm

Maximum Motor Speed

The maximum rotational speed of the engine in revolutions per minute. For drilling tasks, a number of revolutions up to 1500rpm is perfectly satisfactory, as there is a risk of breaking the drill bit due to the increase in temperature above that level, while for screwing tasks higher speeds can be used, especially if the material is soft such as wood or plasterboard.
Speed Adjustment
Yes

Speed Adjustment

Ability to adjust the rotation speed according to the task (low speed for screwing, higher speed for drilling into larger walls, maximum speed for drilling into concrete)
Maximum Torque
32 Nm

Maximum Torque

The maximum power that the tool can deliver to rotate a drill or a screw. Up to 20Nm, we can screw/unscrew small screws that do not require a lot of force to rotate. From 20 to 60Nm, we can perform drilling tasks in addition to screwing. More than 60Nm is mainly encountered in impact drivers that can screw/unscrew screws that require a lot of force to rotate, such as bolts.
Maximum Number of Hits
-
Torque Adjustment
Yes

Torque Adjustment

The ability to adjust the torque of the tool's operation according to the task at hand. (Low torque for easy screwing/unscrewing, high torque for drilling into walls).
Percussive
No

Percussive

The impact function provides high power to easily and quickly complete even the most demanding tasks.
Angle
No
Interchangeable Head
Yes

Interchangeable Head


Ability to switch between different types of chucks for a wider range of tasks.
Reception
Interchangeable Heads
Maximum Chuck Diameter
13 mm

Maximum Chuck Diameter

The maximum size of drill bit or tip you can use. The larger the chuck, the more accessories it fits.
Net Weight
1200 gr
Weight (with Battery)
1200 gr

Extra Features

Carrying Case
Case

Carrying Case

Case
It is delivered together with a carrying case or suitcase.
Handle Included
No
Integrated Light
Yes
With Charger
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions (1)

Questions

7 users have this product and can help you

Ask for the product
0 Replies Reply to
See all questions (1)

Description & Specifications

The Milwaukee M12 BDDX SET-202C is a 12 V cordless drill/driver with a FIXTEC interchangeable head system. The removable chuck, metal right-angle head and metal offset head allow for different working configurations. Removing the chuck reveals a bit holder and reduces the tool’s length to 153 mm.

The REDLINK digital circuit board provides overload protection for the tool and battery. The design includes metal planetary gears, a belt clip and an LED work light. The tool is compatible with Milwaukee M12 batteries.

  • Type: Drill/driver
  • Power source: Battery
  • Voltage: 12 V
  • Batteries: 2 M12 B2 Li-ion batteries, each with a capacity of 2 Ah
  • Charger: C12 C
  • Maximum torque: 32 Nm
  • Speeds: 2, with ranges of 0–400 rpm and 0–1,500 rpm
  • Maximum speed: 1,500 rpm
  • Chuck / Holder: Interchangeable heads, chuck up to 13 mm, and right-angle and offset holders for 1/4" hex bits
  • Drilling capacity: Up to 25 mm in wood and 10 mm in steel
  • Work light: LED
  • Weight: 1.2 kg with battery
  • Carrying case: Kitbox
  • Package contents: Removable FIXTEC chuck, right-angle and offset heads, belt clip and 25 mm PZ2 bits

Manufacturer

Manufacturer Details

Warnings & Safety Information

Product Details

Type
Drill Driver

Type

Drill Driver

Suitable for screwing-unscrewing and drilling holes in wood, metal, and various building materials.
Power Source
Battery

Power Source

Battery
Indicates whether the tool operates on battery or directly from the mains. Battery-powered tools offer freedom of movement, while electric ones provide continuous power.
Brushless
No

Brushless

The advantage that brushless motors have over brushed ones is that they do not have friction since there are no carbon brushes. Without carbon brushes, the motors are more efficient and have a longer lifespan as there is no wear (the carbon brushes in brushed motors wear out with use). They produce less noise, maintain constant torque at all speeds, do not overheat, and require no maintenance.

Battery Features

Number of Batteries
2
Battery Voltage
12 V

Battery Voltage

It corresponds to the power of the tool. Higher voltage means more power and durability for heavy-duty tasks.
Battery Capacity
2 Ah

Battery Capacity

The battery capacity. The higher the number, the longer the tool's operating time. An average continuous working time is 20-25 minutes per ah, but it always depends on the type of work we are doing.
Secondary Battery Charge Ah
2 Ah
Compatible Battery Type
Milwaukee M12

Compatible Battery Type

The type of battery that can be installed in the tool.

Drilling Abilities

Steel Ø
10 mm

Steel Ø

The maximum possible drilling diameter in metal. The most common diameter for household screws is 6-8mm.
Wood Ø
25 mm

Features & Functions

Maximum Motor Speed
1500 rpm

Maximum Motor Speed

The maximum rotational speed of the engine in revolutions per minute. For drilling tasks, a number of revolutions up to 1500rpm is perfectly satisfactory, as there is a risk of breaking the drill bit due to the increase in temperature above that level, while for screwing tasks higher speeds can be used, especially if the material is soft such as wood or plasterboard.
Speed Adjustment
Yes

Speed Adjustment

Ability to adjust the rotation speed according to the task (low speed for screwing, higher speed for drilling into larger walls, maximum speed for drilling into concrete)
Maximum Torque
32 Nm

Maximum Torque

The maximum power that the tool can deliver to rotate a drill or a screw. Up to 20Nm, we can screw/unscrew small screws that do not require a lot of force to rotate. From 20 to 60Nm, we can perform drilling tasks in addition to screwing. More than 60Nm is mainly encountered in impact drivers that can screw/unscrew screws that require a lot of force to rotate, such as bolts.
Maximum Number of Hits
-
Torque Adjustment
Yes

Torque Adjustment

The ability to adjust the torque of the tool's operation according to the task at hand. (Low torque for easy screwing/unscrewing, high torque for drilling into walls).
Percussive
No

Percussive

The impact function provides high power to easily and quickly complete even the most demanding tasks.
Angle
No
Interchangeable Head
Yes

Interchangeable Head


Ability to switch between different types of chucks for a wider range of tasks.
Reception
Interchangeable Heads
Maximum Chuck Diameter
13 mm

Maximum Chuck Diameter

The maximum size of drill bit or tip you can use. The larger the chuck, the more accessories it fits.
Net Weight
1200 gr
Weight (with Battery)
1200 gr

Extra Features

Carrying Case
Case

Carrying Case

Case
It is delivered together with a carrying case or suitcase.
Handle Included
No
Integrated Light
Yes
With Charger
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

269,99 €
Free   shipping cost