Sign up in one tap with Google, Apple or Facebook
Isomat Multifill-diamond 1-12 coloured grout is mixed with water and used for joints 1–12 mm wide in tiles and natural stone. Its rapid setting and Portland-cement-free formula help ensure uniform colour, without salt stains or colour variations. It does not shrink and contains bacteriostatic agents that inhibit bacterial growth in the joints.
Suitable for indoor and outdoor use, including kitchens, bathrooms, balconies and swimming pools. Clean and dampen the joints before application. After mixing with water, leave the material to rest for approximately 3 minutes, then mix again. Apply diagonally with a rubber grout float and remove excess with a damp sponge.
- Type: Coloured grout
- Weight: 4 kg
- Colour: Light grey
- Joint width: 1–12 mm
- Setting time: Rapid
- Water repellency: Very high
- Shrinkage resistance: Non-shrinking
- Strength development: Within 24 hours
- Pot life: At least 50 minutes at +20 °C
- Consumption: 0.2–2.0 kg/m²
- Mixing water: 0.90–1.00 l per 4 kg pack
- Compressive strength after 28 days: 25 N/mm²
- Flexural strength after 28 days: 7 N/mm²
- Application temperature: +5 °C to +35 °C
- Standard: CG2 WA, EN 13888
Dimensions
- Type
- Tile Joint Filler
- Attributes
- Water
- Colour
- Grey
- Type
- Liquid
- Application Surface
- Plasterboard
- Sanding Capability
- No
- No Shrinkage / Crack Resistance
- Yes
Quantity
- Weight
- 4 kg
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.