Putty Fillers

Isomat Multifill-diamond 1-12 Mm Tile Joint Filler 4 Kg Anemone

Isomat Multifill-diamond 1-12 is a resin-based coloured grout for joints 1–12 mm wide in tiles and natural stone. It sets quickly and contains no Portland cement, helping to ensure a uniform colour...

Isomat Multifill-diamond 1-12 is a resin-based coloured grout for joints 1–12 mm wide in tiles and natural stone. It sets quickly and contains no Portland cement, helping to ensure a uniform colour without salt stains or discolouration. It contains bacteriostatic ingredients that inhibit bacterial growth in the joints.

Suitable for indoor and outdoor areas,...

See Description & Specifications See Description & Specifications
18 90 €
Delivery Mon, 30 Nov - Wed, 02 Dec
4,50 € shipping cost
Sent from Greece
From mollaoglou.gr
Greece
10 pieces
See Construction Materials on the page of mollaoglou.gr

Learn more about invoicing
Questions

Description & Specifications

Isomat Multifill-diamond 1-12 is a resin-based coloured grout for joints 1–12 mm wide in tiles and natural stone. It sets quickly and contains no Portland cement, helping to ensure a uniform colour without salt stains or discolouration. It contains bacteriostatic ingredients that inhibit bacterial growth in the joints.

Suitable for indoor and outdoor areas, including kitchens, bathrooms, balconies and swimming pools. Dampen the joints with a wet sponge before application. Mix the product with water using a low-speed drill, leave it to mature for approximately 3 minutes, then mix again. Apply diagonally with a rubber grout float and remove excess with a damp sponge.

  • Type: Coloured grout
  • Colour: Anemone
  • Weight: 4 kg
  • Joint width: 1–12 mm
  • Standard: CG2 WA, EN 13888
  • Water repellency: Very high, with a drop effect
  • Shrinkage: Does not shrink
  • Strength development time: Within 24 hours
  • Pot life: At least 50 minutes at +20°C
  • Maturation time: Approximately 3 minutes
  • Mixing water: 0.90–1.00 l per 4 kg pack
  • Compressive strength: 25 N/mm² after 28 days
  • Flexural strength: 7 N/mm² after 28 days
  • Consumption: 0.2–2.0 kg/m²
  • Application temperature: +5°C to +35°C
  • Application: On tiles and natural stone, indoors and outdoors
  • Portland cement content: Portland cement-free
  • Bacteriostatic ingredients: Yes

Manufacturer

Dimensions

Type
Tile Joint Filler
Attributes
Water
Colour
Beige
Type
Liquid
Application Surface
Plasterboard
Sanding Capability
No
No Shrinkage / Crack Resistance
Yes

Quantity

Weight
4 kg

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

18,90 €
4,50 €   shipping cost