Interior & Exterior House Paints

Isomat Premium Color Plastic Paint for Interior Use 10 L Base P

Isomat Premium Color emulsion paint is intended for indoor use and creates a matt finish. It offers high opacity, dries quickly and is almost odourless. It can be applied to new or old concrete,...

Isomat Premium Color emulsion paint is intended for indoor use and creates a matt finish. It offers high opacity, dries quickly and is almost odourless. It can be applied to new or old concrete, plaster and plasterboard surfaces, as well as surfaces filled with acrylic or cement-based fillers.

Its resistance to wet scrubbing is Class 1 according to EN ISO...

See Description & Specifications See Description & Specifications
48 92 €
Delivery Fri, 04 Dec - Tue, 08 Dec
43,00 € shipping cost
Sent from Greece
From Tehnobeton 5.0 (6)

Learn more about invoicing
Questions

Description & Specifications

Isomat Premium Color emulsion paint is intended for indoor use and creates a matt finish. It offers high opacity, dries quickly and is almost odourless. It can be applied to new or old concrete, plaster and plasterboard surfaces, as well as surfaces filled with acrylic or cement-based fillers.

Its resistance to wet scrubbing is Class 1 according to EN ISO 11998, and it adheres strongly to new or old substrates. It complies with EN 71-3 Category III, is certified Indoor Air Comfort GOLD and has a VOC emissions class of A+ under French legislation. Before application, the surface must be dry and free from grease, dust and loose material. Apply the paint in two coats using a roller, brush or airless spray gun, undiluted or thinned with 5–10% clean water. Clean tools with water immediately after use.

  • Type: Acrylic emulsion paint
  • Use: Interior
  • Colour: White
  • Base: P
  • Quantity: 10 L
  • Finish: Matt
  • Gloss: < 5 at 85°
  • Resistance to wet scrubbing: Class 1 according to EN ISO 11998
  • Drying time: Approximately 1 hour to touch
  • Recoating time: 3–4 hours
  • Coverage: Approximately 12 m²/L per coat on suitably prepared surfaces
  • Certification: Indoor Air Comfort GOLD
  • Standard: EN 71-3, Category III
  • VOC emissions class: A+ under French legislation
  • Environmental declaration: EPD-IES-0009671

Manufacturer

Usage
Interior
Quantity
10 lt
Features
Acrilyc, Watercolor
Colour
White

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

48,92 €
43,00 €   shipping cost