Berling All in One acrylic enamel is suitable for wood, metal and PVC, both indoors and outdoors. Its hydrophobic resins help it adhere and protect against moisture, while also providing rust protection. On most surfaces, the first coat can serve as a primer when thinned with water.
Apply with a brush or roller. Thin the first coat with 15–20% water and the two finish coats with 10–15% water by volume. On aluminium, galvanised surfaces and glass, Berling All Purpose Primer is recommended. In coastal or highly corrosive environments, first apply a heavy-duty anti-corrosion primer, followed by three coats of enamel.
- Type: Acrylic enamel
- Colour: Cypress green
- Suitable for: Wood, metal and PVC
- Use: Indoor and outdoor areas
- Properties: Rust protection, moisture protection
- Thinning: With water: 15–20% for the first coat and 10–15% by volume for the finish coats
- Coverage: 12–14 m²/l per coat, depending on the surface
- Touch dry: ½–1 hour
- Through-dry: At least 24 hours
- Recoating: After 8 hours
- Full development of resistance: After at least 3 days
- Density: 1.30 ± 0.02 g/cm³
- VOC: Up to 100 g/l
- Quantity: 2.5 l
Product Details
- Type
- Wood, Metal
- Type
- Varnish Colour
- Colour
- Green
- Quantity in lt
- 2.5 lt
Especially
- Properties
- Corrosion Inhibitor
- Acrilyc
- Yes
- Water
- No
- Solvent
- No
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.