Dulux Trade Metalshield Gloss enamel paint is suitable for ferrous and non-ferrous metals, indoors and outdoors. Its solvent-based alkyd formula and lightfast pigments are combined with a glossy finish. It protects surfaces such as railings, garage doors, stairs and elevator shafts from corrosion.
It is touch-dry in 1–2 hours and can be recoated after 4–6 hours. Apply with a brush or roller after stirring well; do not spray. New or bare surfaces require a suitable Metalshield primer, followed by two coats of Metalshield Gloss. Do not apply at temperatures below 5°C. It is not intended for floors or stair treads subject to heavy traffic.
- Type: Metal enamel paint
- Colour: White
- Quantity: 2.5 lt
- Base: Solvent-based alkyd resin
- Finish: Gloss
- Suitable surfaces: Ferrous and non-ferrous metals
- Use: Interior and exterior
- Protection: Corrosion protection
- Coverage: Up to 13 m²/lt
- Touch-dry time: 1–2 hours
- Recoating time: 4–6 hours
- Wet film thickness: 80 μm
- Dry film thickness: 40 μm
- Application temperature: From 5°C
- VOC content: Up to 430 g/l
- Application method: Brush or roller
- Primer for new or bare surfaces: Suitable Metalshield primer
- Topcoat coats: 2
Product Details
- Type
- Metal
- Type
- Varnish Colour
- Colour
- White
- Quantity in lt
- 2.5 lt
Especially
- Finish
- Shiny
- Acrilyc
- No
- Water
- No
- Solvent
- Yes
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.