Gas Meters

Forensics Detectors FD-600M-CO2-PPM CO2 Gas Meter

The Forensics Detectors FD-600M-CO2-PPM gas meter measures CO2 concentrations from 0 to 5,000 ppm with a resolution of 1 ppm. The built-in sampling pump and NDIR sensor are used for detection, and the...

The Forensics Detectors FD-600M-CO2-PPM gas meter measures CO2 concentrations from 0 to 5,000 ppm with a resolution of 1 ppm. The built-in sampling pump and NDIR sensor are used for detection, and the sensor has a service life of over 5 years. It is calibrated using a traceable CO2 gas source.

The built-in 512 MB TF memory stores up to 1,000,000 records,...

See Description & Specifications See Description & Specifications
The product is not available for shipping to the selected country.
Questions

Description & Specifications

The Forensics Detectors FD-600M-CO2-PPM gas meter measures CO2 concentrations from 0 to 5,000 ppm with a resolution of 1 ppm. The built-in sampling pump and NDIR sensor are used for detection, and the sensor has a service life of over 5 years. It is calibrated using a traceable CO2 gas source.

The built-in 512 MB TF memory stores up to 1,000,000 records, equivalent to 277 hours at a sampling rate of 1 sample per second. CSV files can be transferred to a computer via USB Type-C without additional software. The 3.5-inch HD color display shows graphs, and alarms can be set for low and high readings.

  • Gas: CO2
  • Measurement range: 0–5,000 ppm
  • Resolution: 1 ppm
  • Sensor type: NDIR
  • Sensor service life: Over 5 years
  • Sampling: Built-in pump
  • Pump flow rate: 0.3–0.7 LPM
  • Pump noise: Below 60 dB
  • Data logging: Built-in 512 MB TF memory, up to 1,000,000 records
  • Data transfer: USB Type-C, CSV files
  • Display: 3.5-inch HD color display with graphs
  • Alarms: LED, buzzer, and vibration, with adjustable low and high limits
  • Housing material: ABS with a non-slip rubber grip
  • Probe: 4 ft telescopic stainless steel probe
  • Air inlet fitting: 3 mm (1/8-inch) outer diameter
  • Charging port: USB Type-C
  • Certification: ATEX Ex ia IIC T4 Ga
  • Calibration interval: 12 months
  • Analyzer dimensions: 23 × 9 × 6 cm
  • Analyzer weight: 800 g
  • Package contents: CO2 data logging analyzer, user manual, USB charging cable, charger, analyzer case, 4 ft telescopic stainless steel probe, tubing, and calibration certificate

Manufacturer

Type of Gas
CO2

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.