Skroutz.cy

Bosch GRD 18V-127 HX 18V Angle Drill Driver Solo

50 € coupon for your next purchase! + 1 offer for you!

Power Drill Drivers & Screwdrivers

Bosch GRD 18V-127 HX 18V Angle Drill Driver Solo

The angular drill driver from the company Bosch operates with battery 18 Volt (battery and charger not included). It is suitable for both screwing - unscrewing, as well as for drilling holes. More specifically, it drills in wood, steel with a hole diameter of up to 13 millimeters and various other building materials.
It has the ability to adjust the rotation speed and operating torque, so it can be set according to the task you want to perform, for example, screwing with low torque and speed on soft surfaces. Its chuck can accept bits with a base diameter of up to 13 millimeters. See full description

  • Number of Batteries: 0
  • Battery Voltage: 18V
  • Integrated Light
457 67 €
You earn a 50 € next purchase coupon
with an order over 200 €

Deals & Benefits

Κέρδισε 50€ κουπόνι!

Κάνε μία παραγγελία από 200€ έως 600€ έως 18/11 και κέρδισε κουπόνι 50€ για την επόμενη παραγγελία σου άνω των 300€.

Μην ξεχνάς ότι μπορείς να κερδίσεις έως 2 κουπόνια συνολικής αξίας 150€ για να κάνεις τις Black Friday αγορές σου ακόμα πιο συμφέρουσες!

  • H προωθητική ενέργεια ισχύει για μία (1) παραγγελία συνολικής αξίας προϊόντων από 200€ έως 600€ μέσω της Υπηρεσίας “Αγορά μέσω Skroutz” μεταξύ 9/11 00:01 έως και 18/11 23:59 με διεύθυνση αποστολής στην Κύπρο.
  • Το κουπόνι 50€ αποδίδεται αμέσως μετά την παράδοση της παραγγελίας συμμετοχής στην προωθητική ενέργεια, θα έχει διάρκεια 30 ημερών και θα είναι εξαργυρώσιμο σε μία παραγγελία άνω των 300€.

Terms & conditions apply
You earn a 100 € next purchase coupon
with an order over 600 €

Deals & Benefits

Κέρδισε 100€ κουπόνι!

Κάνε μία παραγγελία άνω των 600€ έως 18/11 και κέρδισε κουπόνι 100€ για την επόμενη παραγγελία σου άνω των 400€.

Μην ξεχνάς ότι μπορείς να κερδίσεις έως 2 κουπόνια συνολικής αξίας 150€ για να κάνεις τις Black Friday αγορές σου ακόμα πιο συμφέρουσες!

  • H προωθητική ενέργεια ισχύει για μία (1) παραγγελία συνολικής αξίας προϊόντων άνω των 600€ μέσω της Υπηρεσίας “Αγορά μέσω Skroutz” μεταξύ 9/11 00:01 έως και 18/11 23:59 με διεύθυνση αποστολής στην Κύπρο.
  • Το κουπόνι 100€ αποδίδεται αμέσως μετά την παράδοση της παραγγελίας συμμετοχής στην προωθητική ενέργεια, θα έχει διάρκεια 30 ημέρες και θα είναι εξαργυρώσιμο σε μία παραγγελία άνω των 400€.

Terms & conditions apply
Delivery Tue, 24 Nov - Thu, 26 Nov
Free shipping cost
Sent from Greece
From Getters 4.5 (116)
4.5 (116 reviews)
Greece
4 pieces
See Power Tools on the page of Getters

Shop selection criteria

Why do we recommend buying from this shop?

We don’t only look at the price. We weigh different factors to find an offer that combines a good price, fast delivery and a reliable purchase.

  • Product price

    We calculate the total price you will pay and any discounts available from the shop.

  • Shipping & delivery time

    We check how quickly the product can be shipped and when you will receive it, based on your address.

  • Shop reliability

    We look at how often shops complete their orders successfully and how consistently they serve their customers.

  • Official reseller

    Where available, we take into account whether the shop is an official reseller of the brand.
What if it breaks?

You're covered by the statutory 2-year warranty. Contact us and we'll handle the entire process with the store, ensuring your issue is resolved with prompt support through a repair, replacement, or refund. Learn more

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Learn more about invoicing
Review the product
Product report

Description

Description

The angular drill driver from the company Bosch operates with battery 18 Volt (battery and charger not included). It is suitable for both screwing - unscrewing, as well as for drilling holes. More specifically, it drills in wood, steel with a hole diameter of up to 13 millimeters and various other building materials.
It has the ability to adjust the rotation speed and operating torque, so it can be set according to the task you want to perform, for example, screwing with low torque and speed on soft surfaces. Its chuck can accept bits with a base diameter of up to 13 millimeters.

  • Number of Batteries: 0
  • Battery Voltage: 18V
  • Integrated Light

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Details

Type
Drill Driver

Type

Drill Driver

Suitable for screwing-unscrewing and drilling holes in wood, metal, and various building materials.
Power Source
Battery

Power Source

Battery
Indicates whether the tool operates on battery or directly from the mains. Battery-powered tools offer freedom of movement, while electric ones provide continuous power.
Brushless
No

Brushless

The advantage that brushless motors have over brushed ones is that they do not have friction since there are no carbon brushes. Without carbon brushes, the motors are more efficient and have a longer lifespan as there is no wear (the carbon brushes in brushed motors wear out with use). They produce less noise, maintain constant torque at all speeds, do not overheat, and require no maintenance.

Battery Features

Number of Batteries
0

Number of Batteries: 0


Solo - The package does not include a battery and charger. Please prefer it if you already have a compatible battery from other tools.
Battery Voltage
18 V

Battery Voltage

It corresponds to the power of the tool. Higher voltage means more power and durability for heavy-duty tasks.

Drilling Abilities

Steel Ø
13 mm

Steel Ø

The maximum possible drilling diameter in metal. The most common diameter for household screws is 6-8mm.

Features & Functions

Maximum Motor Speed
1800 rpm

Maximum Motor Speed

The maximum rotational speed of the engine in revolutions per minute. For drilling tasks, a number of revolutions up to 1500rpm is perfectly satisfactory, as there is a risk of breaking the drill bit due to the increase in temperature above that level, while for screwing tasks higher speeds can be used, especially if the material is soft such as wood or plasterboard.
Speed Adjustment
Yes

Speed Adjustment

Ability to adjust the rotation speed according to the task (low speed for screwing, higher speed for drilling into larger walls, maximum speed for drilling into concrete)
Maximum Torque
100 Nm

Maximum Torque

The maximum power that the tool can deliver to rotate a drill or a screw. Up to 20Nm, we can screw/unscrew small screws that do not require a lot of force to rotate. From 20 to 60Nm, we can perform drilling tasks in addition to screwing. More than 60Nm is mainly encountered in impact drivers that can screw/unscrew screws that require a lot of force to rotate, such as bolts.
Torque Adjustment
Yes

Torque Adjustment

The ability to adjust the torque of the tool's operation according to the task at hand. (Low torque for easy screwing/unscrewing, high torque for drilling into walls).
Percussive
No

Percussive

The impact function provides high power to easily and quickly complete even the most demanding tasks.
Angle
Yes

Angle


Features a head that is positioned at an angle (usually 90 degrees) relative to the body of the tool, thus allowing access to tight or hard-to-reach angles.
Interchangeable Head
No
Maximum Chuck Diameter
13 mm

Maximum Chuck Diameter

The maximum size of drill bit or tip you can use. The larger the chuck, the more accessories it fits.
Net Weight
3100 gr
Weight (with Battery)
3100 gr

Extra Features

Carrying Case
Without
Handle Included
No
Integrated Light
Yes
With Charger
-

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

Those users who have this product can help you

Ask for the product

Description & Specifications

Product Details

Type
Drill Driver

Type

Drill Driver

Suitable for screwing-unscrewing and drilling holes in wood, metal, and various building materials.
Power Source
Battery

Power Source

Battery
Indicates whether the tool operates on battery or directly from the mains. Battery-powered tools offer freedom of movement, while electric ones provide continuous power.
Brushless
No

Brushless

The advantage that brushless motors have over brushed ones is that they do not have friction since there are no carbon brushes. Without carbon brushes, the motors are more efficient and have a longer lifespan as there is no wear (the carbon brushes in brushed motors wear out with use). They produce less noise, maintain constant torque at all speeds, do not overheat, and require no maintenance.

Battery Features

Number of Batteries
0

Number of Batteries: 0


Solo - The package does not include a battery and charger. Please prefer it if you already have a compatible battery from other tools.
Battery Voltage
18 V

Battery Voltage

It corresponds to the power of the tool. Higher voltage means more power and durability for heavy-duty tasks.

Drilling Abilities

Steel Ø
13 mm

Steel Ø

The maximum possible drilling diameter in metal. The most common diameter for household screws is 6-8mm.

Features & Functions

Maximum Motor Speed
1800 rpm

Maximum Motor Speed

The maximum rotational speed of the engine in revolutions per minute. For drilling tasks, a number of revolutions up to 1500rpm is perfectly satisfactory, as there is a risk of breaking the drill bit due to the increase in temperature above that level, while for screwing tasks higher speeds can be used, especially if the material is soft such as wood or plasterboard.
Speed Adjustment
Yes

Speed Adjustment

Ability to adjust the rotation speed according to the task (low speed for screwing, higher speed for drilling into larger walls, maximum speed for drilling into concrete)
Maximum Torque
100 Nm

Maximum Torque

The maximum power that the tool can deliver to rotate a drill or a screw. Up to 20Nm, we can screw/unscrew small screws that do not require a lot of force to rotate. From 20 to 60Nm, we can perform drilling tasks in addition to screwing. More than 60Nm is mainly encountered in impact drivers that can screw/unscrew screws that require a lot of force to rotate, such as bolts.
Torque Adjustment
Yes

Torque Adjustment

The ability to adjust the torque of the tool's operation according to the task at hand. (Low torque for easy screwing/unscrewing, high torque for drilling into walls).
Percussive
No

Percussive

The impact function provides high power to easily and quickly complete even the most demanding tasks.
Angle
Yes

Angle


Features a head that is positioned at an angle (usually 90 degrees) relative to the body of the tool, thus allowing access to tight or hard-to-reach angles.
Interchangeable Head
No
Maximum Chuck Diameter
13 mm

Maximum Chuck Diameter

The maximum size of drill bit or tip you can use. The larger the chuck, the more accessories it fits.
Net Weight
3100 gr
Weight (with Battery)
3100 gr

Extra Features

Carrying Case
Without
Handle Included
No
Integrated Light
Yes
With Charger
-

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Description

The angular drill driver from the company Bosch operates with battery 18 Volt (battery and charger not included). It is suitable for both screwing - unscrewing, as well as for drilling holes. More specifically, it drills in wood, steel with a hole diameter of up to 13 millimeters and various other building materials.
It has the ability to adjust the rotation speed and operating torque, so it can be set according to the task you want to perform, for example, screwing with low torque and speed on soft surfaces. Its chuck can accept bits with a base diameter of up to 13 millimeters.

  • Number of Batteries: 0
  • Battery Voltage: 18V
  • Integrated Light

Manufacturer

Manufacturer Details

Warnings & Safety Information
457,67 €
Free   shipping cost