Skroutz.cy

Mac Allister GOD101354396 18V Cordless Drill Driver
Power Drill Drivers & Screwdrivers

Mac Allister GOD101354396 18V Cordless Drill Driver

The Mac Allister GOD101354396 is an 18 V cordless drill driver for drilling into wood and steel, as well as driving screws for DIY projects. It features a 13 mm chuck for holding drill bits and...

The Mac Allister GOD101354396 is an 18 V cordless drill driver for drilling into wood and steel, as well as driving screws for DIY projects. It features a 13 mm chuck for holding drill bits and screwdriver bits, an ergonomic design and an integrated work light. The Li-ion batteries take 60 minutes to charge.

  • Type: Drill driver
  • Power source: Battery
  • Voltage:...
See full description See full description

Top specs

  • Power Supply

    Battery

    Indicates whether the tool operates on battery or directly from the mains. Battery-powered tools offer freedom of movement, while electric ones provide continuous power.

  • Speed Setting

    Ability to adjust the rotation speed according to the task (low speed for screwing, higher speed for drilling into larger walls, maximum speed for drilling into concrete)

  • Voltage

    It corresponds to the power of the tool. Higher voltage means more power and durability for heavy-duty tasks.

  • Battery Capacity

    The battery capacity. The higher the number, the longer the tool's operating time. An average continuous working time is 20-25 minutes per ah, but it always depends on the type of work we are doing.

  • Maximum Motor Speed

    The maximum rotational speed of the engine in revolutions per minute. For drilling tasks, a number of revolutions up to 1500rpm is perfectly satisfactory, as there is a risk of breaking the drill bit due to the increase in temperature above that level, while for screwing tasks higher speeds can be used, especially if the material is soft such as wood or plasterboard.

  • Chuck Diameter

    The maximum size of drill bit or tip you can use. The larger the chuck, the more accessories it fits.

  • Torque Setting

    The ability to adjust the torque of the tool's operation according to the task at hand. (Low torque for easy screwing/unscrewing, high torque for drilling into walls).
  • See all
202,88 €
182 86 €
-20,02€ discount
Delivery Thursday, 12 November
29,00 € to a Skroutz Point or 30,00 € to an address
Do you want it with 5,00 € shipping discount?
Sent from Romania
From BricoCasa
Romania
5 pieces
See Power Tools on the page of BricoCasa
What if it breaks?

You're covered by the statutory 2-year warranty. Contact us and we'll handle the entire process with the store, ensuring your issue is resolved with prompt support through a repair, replacement, or refund. Learn more

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Learn more about invoicing
Review the product
Product report

Description

Description

The Mac Allister GOD101354396 is an 18 V cordless drill driver for drilling into wood and steel, as well as driving screws for DIY projects. It features a 13 mm chuck for holding drill bits and screwdriver bits, an ergonomic design and an integrated work light. The Li-ion batteries take 60 minutes to charge.

  • Type: Drill driver
  • Power source: Battery
  • Voltage: 18 V
  • Batteries: 2 × 2 Ah Li-ion
  • Charger: Included, 2.4 A
  • Maximum torque: 35 Nm
  • Maximum speed: Up to 1,500 rpm
  • Chuck / holder: 13 mm chuck
  • Drilling capacity: Up to 30 mm in wood and up to 10 mm in steel
  • Work light: Integrated
  • Weight: 8.3 kg with battery
  • Package contents: Drill driver, 2 × 2 Ah Li-ion batteries, 2.4 A charger and 158 accessories

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Details

Type
Drill Driver

Type

Drill Driver

Suitable for screwing-unscrewing and drilling holes in wood, metal, and various building materials.
Power Source
Battery

Power Source

Battery
Indicates whether the tool operates on battery or directly from the mains. Battery-powered tools offer freedom of movement, while electric ones provide continuous power.
Brushless
No

Brushless

The advantage that brushless motors have over brushed ones is that they do not have friction since there are no carbon brushes. Without carbon brushes, the motors are more efficient and have a longer lifespan as there is no wear (the carbon brushes in brushed motors wear out with use). They produce less noise, maintain constant torque at all speeds, do not overheat, and require no maintenance.

Battery Features

Battery Voltage
18 V

Battery Voltage

It corresponds to the power of the tool. Higher voltage means more power and durability for heavy-duty tasks.
Battery Capacity
2 Ah

Battery Capacity

The battery capacity. The higher the number, the longer the tool's operating time. An average continuous working time is 20-25 minutes per ah, but it always depends on the type of work we are doing.
Secondary Battery Charge Ah
2 Ah

Features & Functions

Maximum Motor Speed
1500 rpm

Maximum Motor Speed

The maximum rotational speed of the engine in revolutions per minute. For drilling tasks, a number of revolutions up to 1500rpm is perfectly satisfactory, as there is a risk of breaking the drill bit due to the increase in temperature above that level, while for screwing tasks higher speeds can be used, especially if the material is soft such as wood or plasterboard.
Speed Adjustment
Yes

Speed Adjustment

Ability to adjust the rotation speed according to the task (low speed for screwing, higher speed for drilling into larger walls, maximum speed for drilling into concrete)
Maximum Torque
35 Nm

Maximum Torque

The maximum power that the tool can deliver to rotate a drill or a screw. Up to 20Nm, we can screw/unscrew small screws that do not require a lot of force to rotate. From 20 to 60Nm, we can perform drilling tasks in addition to screwing. More than 60Nm is mainly encountered in impact drivers that can screw/unscrew screws that require a lot of force to rotate, such as bolts.
Maximum Number of Hits
-
Torque Adjustment
Yes

Torque Adjustment

The ability to adjust the torque of the tool's operation according to the task at hand. (Low torque for easy screwing/unscrewing, high torque for drilling into walls).
Percussive
-

Percussive

The impact function provides high power to easily and quickly complete even the most demanding tasks.
Angle
No
Interchangeable Head
No
Reception
-
Maximum Chuck Diameter
13 mm

Maximum Chuck Diameter

The maximum size of drill bit or tip you can use. The larger the chuck, the more accessories it fits.
Net Weight
-
Weight (with Battery)
8300 gr

Extra Features

Carrying Case
-
Handle Included
No
Integrated Light
Yes
With Charger
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

Those users who have this product can help you

Ask for the product

Description & Specifications

The Mac Allister GOD101354396 is an 18 V cordless drill driver for drilling into wood and steel, as well as driving screws for DIY projects. It features a 13 mm chuck for holding drill bits and screwdriver bits, an ergonomic design and an integrated work light. The Li-ion batteries take 60 minutes to charge.

  • Type: Drill driver
  • Power source: Battery
  • Voltage: 18 V
  • Batteries: 2 × 2 Ah Li-ion
  • Charger: Included, 2.4 A
  • Maximum torque: 35 Nm
  • Maximum speed: Up to 1,500 rpm
  • Chuck / holder: 13 mm chuck
  • Drilling capacity: Up to 30 mm in wood and up to 10 mm in steel
  • Work light: Integrated
  • Weight: 8.3 kg with battery
  • Package contents: Drill driver, 2 × 2 Ah Li-ion batteries, 2.4 A charger and 158 accessories

Manufacturer

Manufacturer Details

Warnings & Safety Information

Product Details

Type
Drill Driver

Type

Drill Driver

Suitable for screwing-unscrewing and drilling holes in wood, metal, and various building materials.
Power Source
Battery

Power Source

Battery
Indicates whether the tool operates on battery or directly from the mains. Battery-powered tools offer freedom of movement, while electric ones provide continuous power.
Brushless
No

Brushless

The advantage that brushless motors have over brushed ones is that they do not have friction since there are no carbon brushes. Without carbon brushes, the motors are more efficient and have a longer lifespan as there is no wear (the carbon brushes in brushed motors wear out with use). They produce less noise, maintain constant torque at all speeds, do not overheat, and require no maintenance.

Battery Features

Battery Voltage
18 V

Battery Voltage

It corresponds to the power of the tool. Higher voltage means more power and durability for heavy-duty tasks.
Battery Capacity
2 Ah

Battery Capacity

The battery capacity. The higher the number, the longer the tool's operating time. An average continuous working time is 20-25 minutes per ah, but it always depends on the type of work we are doing.
Secondary Battery Charge Ah
2 Ah

Features & Functions

Maximum Motor Speed
1500 rpm

Maximum Motor Speed

The maximum rotational speed of the engine in revolutions per minute. For drilling tasks, a number of revolutions up to 1500rpm is perfectly satisfactory, as there is a risk of breaking the drill bit due to the increase in temperature above that level, while for screwing tasks higher speeds can be used, especially if the material is soft such as wood or plasterboard.
Speed Adjustment
Yes

Speed Adjustment

Ability to adjust the rotation speed according to the task (low speed for screwing, higher speed for drilling into larger walls, maximum speed for drilling into concrete)
Maximum Torque
35 Nm

Maximum Torque

The maximum power that the tool can deliver to rotate a drill or a screw. Up to 20Nm, we can screw/unscrew small screws that do not require a lot of force to rotate. From 20 to 60Nm, we can perform drilling tasks in addition to screwing. More than 60Nm is mainly encountered in impact drivers that can screw/unscrew screws that require a lot of force to rotate, such as bolts.
Maximum Number of Hits
-
Torque Adjustment
Yes

Torque Adjustment

The ability to adjust the torque of the tool's operation according to the task at hand. (Low torque for easy screwing/unscrewing, high torque for drilling into walls).
Percussive
-

Percussive

The impact function provides high power to easily and quickly complete even the most demanding tasks.
Angle
No
Interchangeable Head
No
Reception
-
Maximum Chuck Diameter
13 mm

Maximum Chuck Diameter

The maximum size of drill bit or tip you can use. The larger the chuck, the more accessories it fits.
Net Weight
-
Weight (with Battery)
8300 gr

Extra Features

Carrying Case
-
Handle Included
No
Integrated Light
Yes
With Charger
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

182,86 €
30,00 €  

Reduced Shipping

For purchases from Skroutz a discount is applied for this particular product.

Learn more