Skroutz.cy

Kraft & Dele Single-Phase Water Pump 2.93hp
Submersible Water Pumps

Kraft & Dele Single-Phase Water Pump 2.93hp

Maximum motor power: 2200 W

Maximum flow rate: 15,000 l/h

Maximum lifting height: 17 m

Outlet diameter: 1" (25 mm)

Maximum submersion depth: 5 m

Protection rating: IP68 / IPX8

Thermal protection:...

Maximum motor power: 2200 W

Maximum flow rate: 15,000 l/h

Maximum lifting height: 17 m

Outlet diameter: 1" (25 mm)

Maximum submersion depth: 5 m

Protection rating: IP68 / IPX8

Thermal protection: Overheating protection

Protected inlet pipe: Restricts larger debris

Carrying handle: Yes, with integrated power cable

Duty cycle: Maximum use of 30 minutes /...

See full description See full description

Top specs

  • Horsepower

    Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).

  • Voltage

    Single-Phase

    Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 

  • Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

  • Manometric Height

    17

    The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

    • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
    • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
  • See all
59 48 €
60 Coins 60 Coins
Delivery Mon, 09 Nov - Fri, 13 Nov
16,00 € to a Skroutz Point or 17,00 € to an address
Do you want it with 5,00 € shipping discount?
Sent from Romania
From Top Defender 3.8 (12)
3.8 (12 reviews)
Romania
20+ pieces
See Water Pumps on the page of Top Defender
What if it breaks?

You're covered by the statutory 2-year warranty. Contact us and we'll handle the entire process with the store, ensuring your issue is resolved with prompt support through a repair, replacement, or refund.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Learn more about invoicing
Review the product
Product report

Description

Description

Maximum motor power: 2200 W

Maximum flow rate: 15,000 l/h

Maximum lifting height: 17 m

Outlet diameter: 1" (25 mm)

Maximum submersion depth: 5 m

Protection rating: IP68 / IPX8

Thermal protection: Overheating protection

Protected inlet pipe: Restricts larger debris

Carrying handle: Yes, with integrated power cable

Duty cycle: Maximum use of 30 minutes / approximately 15 minutes of rest

Technical Specifications:

  • Model: WDS-2425
  • Pump type: Submersible, for clean and slightly dirty water
  • Voltage / Frequency: 220 V / 50 Hz
  • Rotational speed: 2850 rpm
  • Permitted liquid parameters: Temperature below 35 °C; pH 6.5–8.5; contaminants up to 0.2 mm and less than 0.1% content

Package Contents:

  • WDS-2425 pump
  • Instructions in Polish
  • Original packaging
  • Receipt or tax invoice
  • 12-month warranty

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
2.93 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
2200 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
17 m
Motor Rotation Speed
2850 rpm

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
1"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
17 m

Maximum Head Height: 17


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Pump Submersion Depth
17 m
Maximum Particle Size
25 mm

Maximum Particle Size

Specifies the largest size of solid particles (such as sand, stones, or other impurities) that the device can pump without clogging or being damaged.
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
No
Protection Certification
IP68

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

Those users who have this product can help you

Ask for the product

Description & Specifications

Maximum motor power: 2200 W

Maximum flow rate: 15,000 l/h

Maximum lifting height: 17 m

Outlet diameter: 1" (25 mm)

Maximum submersion depth: 5 m

Protection rating: IP68 / IPX8

Thermal protection: Overheating protection

Protected inlet pipe: Restricts larger debris

Carrying handle: Yes, with integrated power cable

Duty cycle: Maximum use of 30 minutes / approximately 15 minutes of rest

Technical Specifications:

  • Model: WDS-2425
  • Pump type: Submersible, for clean and slightly dirty water
  • Voltage / Frequency: 220 V / 50 Hz
  • Rotational speed: 2850 rpm
  • Permitted liquid parameters: Temperature below 35 °C; pH 6.5–8.5; contaminants up to 0.2 mm and less than 0.1% content

Package Contents:

  • WDS-2425 pump
  • Instructions in Polish
  • Original packaging
  • Receipt or tax invoice
  • 12-month warranty

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
2.93 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
2200 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
17 m
Motor Rotation Speed
2850 rpm

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
1"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
17 m

Maximum Head Height: 17


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Pump Submersion Depth
17 m
Maximum Particle Size
25 mm

Maximum Particle Size

Specifies the largest size of solid particles (such as sand, stones, or other impurities) that the device can pump without clogging or being damaged.
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
No
Protection Certification
IP68

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

59,48 €
16,00 € to a Skroutz Point
or   17,00 €   shipping cost