Metal-Wood Paints

Vitex Solvent-Based Corrosion-Inhibiting Varnish Paint Heavy Metal Silicon Effect 0.75 lt Amethyst Matt Code: amethyst-772

Vitex Heavy Metal Silicon Effect enamel paint is a solvent-based silicone paint with a textured finish, suitable for metal surfaces indoors and outdoors. Its formula, containing iron oxide particles,...

Vitex Heavy Metal Silicon Effect enamel paint is a solvent-based silicone paint with a textured finish, suitable for metal surfaces indoors and outdoors. Its formula, containing iron oxide particles, provides resistance to corrosion and ultraviolet radiation, while the finish is matte. It can also be used to paint wood.

Apply in two coats with a roller or...

See Description & Specifications See Description & Specifications
21 00 €
Delivery Wed, 25 Nov - Fri, 27 Nov
4,50 € shipping cost
Sent from Greece
From K-Home
Greece
5 pieces
See Household Painting Supplies & Tools on the page of K-Home

Learn more about invoicing
Questions

Description & Specifications

Vitex Heavy Metal Silicon Effect enamel paint is a solvent-based silicone paint with a textured finish, suitable for metal surfaces indoors and outdoors. Its formula, containing iron oxide particles, provides resistance to corrosion and ultraviolet radiation, while the finish is matte. It can also be used to paint wood.

Apply in two coats with a roller or brush, thinning by 5% with T 300 Brush Thinner, or with an airless spray gun, thinning by 10–15% with T 350 Spray Gun Thinner. Touch-dry in 2–3 hours and recoatable after 16–18 hours. Do not apply at temperatures below 5 °C or above 35 °C, or at relative humidity above 80%.

  • Type: Enamel paint
  • Suitable for: Metal and wood
  • Use: Interior and exterior metal surfaces
  • Composition: Silicone-based, with iron oxide particles
  • Properties: Anti-rust; resistant to corrosion and ultraviolet radiation
  • Shade: Amethyst 772
  • Colour: Purple
  • Texture: Textured
  • Finish: Matte
  • Base: Solvent-based
  • Quantity: 0.75 L
  • Application: Two coats with a roller, brush or airless spray gun
  • Thinning for roller or brush: 5% with T 300 Brush Thinner
  • Thinning for airless spray gun: 10–15% with T 350 Spray Gun Thinner
  • Touch-dry: 2–3 hours
  • Recoating: After 16–18 hours
  • Application temperature: From 5 °C to 35 °C
  • Maximum application relative humidity: 80%

Manufacturer

Product Number
amethyst-772

Product Details

Type
Metal, Wood
Type
Varnish Colour
Colour
Purple
Quantity in lt
0.75 lt

Especially

Properties
Corrosion Inhibitor
Finish
Matt
Acrilyc
No
Water
No
Solvent
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

21,00 €
4,50 €   shipping cost