Skroutz.cy

Omnigena Single-Phase Well / Rainwater Pump
Submersible Water Pumps

Omnigena Single-Phase Well / Rainwater Pump

Technical specifications:

  • Maximum flow rate: 133 l/min
  • Maximum head: 7 m
  • Motor power: 0.18 kW
  • Voltage: 230 V
  • Outlet size: 1 1/4"
  • Power cable length: 5.5 m
  • Maximum particle size: 22 mm
  • Maximum water...

Technical specifications:

  • Maximum flow rate: 133 l/min
  • Maximum head: 7 m
  • Motor power: 0.18 kW
  • Voltage: 230 V
  • Outlet size: 1 1/4"
  • Power cable length: 5.5 m
  • Maximum particle size: 22 mm
  • Maximum water temperature: 35°C
  • Protection rating: IP 68
  • Maximum immersion depth: 10 m
  • Operating position: Vertical
  • Materials:
    • Motor housing: stainless steel
    • Pump: cast iron
      • ...
See full description See full description

Top specs

  • Voltage

    Single-Phase

    Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 

  • Manometric Height

    7

    The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

    • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
    • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
  • See all
The product is not available for shipping to the selected country.
Review the product
Product report

Description

Description

Technical specifications:

  • Maximum flow rate: 133 l/min
  • Maximum head: 7 m
  • Motor power: 0.18 kW
  • Voltage: 230 V
  • Outlet size: 1 1/4"
  • Power cable length: 5.5 m
  • Maximum particle size: 22 mm
  • Maximum water temperature: 35°C
  • Protection rating: IP 68
  • Maximum immersion depth: 10 m
  • Operating position: Vertical
  • Materials:
    • Motor housing: stainless steel
    • Pump: cast iron
    • Pump cover: cast iron

Application:

The WQ 180F is a compact submersible pump designed for pumping dirty water, as well as rainwater and greywater containing organic impurities with a maximum diameter of no more than 18 mm. It features a float switch that controls activation according to the level of the pumped medium and protects the pump from running dry. WQ 180F submersible pumps are used to pump treated wastewater from the second chamber of a septic tank, drain water from flooded rooms, irrigate, or transfer water from tanks or ponds. Suitable for use in households, agritourism, and agriculture.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Well, Rainwater

Type

Well
They are designed to pump water from underground sources when the water is at a depth, and are mainly used for water supply, irrigation, and other applications in areas that do not have easy access to surface water.
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Cable Length
7 m

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
1 1/4"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
7 m

Maximum Head Height: 7


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Pump Submersion Depth
7 m
Maximum Particle Size
22 mm

Maximum Particle Size

Specifies the largest size of solid particles (such as sand, stones, or other impurities) that the device can pump without clogging or being damaged.
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
Yes
Protection Certification
IP68

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

Those users who have this product can help you

Ask for the product

Description & Specifications

Technical specifications:

  • Maximum flow rate: 133 l/min
  • Maximum head: 7 m
  • Motor power: 0.18 kW
  • Voltage: 230 V
  • Outlet size: 1 1/4"
  • Power cable length: 5.5 m
  • Maximum particle size: 22 mm
  • Maximum water temperature: 35°C
  • Protection rating: IP 68
  • Maximum immersion depth: 10 m
  • Operating position: Vertical
  • Materials:
    • Motor housing: stainless steel
    • Pump: cast iron
    • Pump cover: cast iron

Application:

The WQ 180F is a compact submersible pump designed for pumping dirty water, as well as rainwater and greywater containing organic impurities with a maximum diameter of no more than 18 mm. It features a float switch that controls activation according to the level of the pumped medium and protects the pump from running dry. WQ 180F submersible pumps are used to pump treated wastewater from the second chamber of a septic tank, drain water from flooded rooms, irrigate, or transfer water from tanks or ponds. Suitable for use in households, agritourism, and agriculture.

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Well, Rainwater

Type

Well
They are designed to pump water from underground sources when the water is at a depth, and are mainly used for water supply, irrigation, and other applications in areas that do not have easy access to surface water.
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Cable Length
7 m

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
1 1/4"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
7 m

Maximum Head Height: 7


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Pump Submersion Depth
7 m
Maximum Particle Size
22 mm

Maximum Particle Size

Specifies the largest size of solid particles (such as sand, stones, or other impurities) that the device can pump without clogging or being damaged.
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
Yes
Protection Certification
IP68

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

20% coupon from the shop Epiplobazaar until 25/10!
20% coupon from the shop Epiplobazaar until 25/10!
See more