Elko-Bis technical petroleum jelly has a high melting point and is used to protect threaded connections. It is petroleum jelly- and copper-based, with an NLGI grade of 2.
Store in a closed container, protected from direct sunlight, moisture and mechanical contaminants, away from heat sources and at temperatures up to 25 °C.
- Chemical base: Petroleum jelly and copper
- NLGI grade: NLGI 2
- Dropping point: 54 °C minimum
- Kinematic viscosity at 100 °C: 5 mm²/s minimum
- Acid value: 0.28 mgKOH/g maximum
- Solid foreign matter: None
- Water content: None
- Aqueous extract reaction: Neutral
- Residue after incineration: 0.07% maximum
- Abrasive substances: None
- Corrosive action on steel and copper plates: Withstands 100 °C for 3 hours and 50 °C for 30 hours
- Weight: 0.5 kg
Specifications
- Usage
- -
- Chemical Base
- Vaseline, Copper
- High Temperature
- No
- Waterproof
- No
- High Pressure (EP - Extreme Pressure)
- No
- NLGI Grade
- NLGI 2
- Packaging Type
- -
Capacity
- Weight
- 0.5 kg
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.