Skroutz.cy

Dedra Single-Phase Submersible Pump Motor 750W DED8872
Submersible Water Pumps

Dedra Single-Phase Submersible Pump Motor 750W DED8872

Key features:

  • 750W power & 5700 l/h flow rate
  • Maximum pumping height 75m
  • Stainless steel body
  • 18m power cable

The DEDRA DED8872 submersible pump features 16 impellers for an exceptionally high pumping head of 75 m and IPX8 waterproof protection.

See full description

Top specs

  • Voltage

    Single-Phase

    Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 

  • Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

  • Manometric Height

    75

    The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

    • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
    • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
  • See all
354 98 €
355 Coins 355 Coins
Delivery Wed, 07 Oct - Tue, 13 Oct
32,00 € shipping cost
Do you want it with 27,00 € shipping?
Sent from Greece
From Getters 4.5 (109)
4.5 (109 reviews)
Greece
20+ pieces
See Water Pumps on the page of Getters
What if it breaks?

You're covered by the statutory 2-year warranty. Contact us and we'll handle the entire process with the store, ensuring your issue is resolved with prompt support through a repair, replacement, or refund.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Learn more about invoicing
Review the product
Product report

Description

Description

At a glance

  • Powerful 750W motor with a water flow rate of up to 5700 liters per hour.
  • 16 floating impellers ensure a maximum pumping height of up to 75 meters.
  • Durable stainless steel body and IPX8 protection for submersion up to 7 meters.
  • Long 18-meter power cable for convenient connection without the need for extensions.

Durable Construction and Filtration

Protect your investment with a pump designed for long service life. The durable stainless steel body resists corrosion, while the integrated stainless steel mesh prevents particles larger than 0.5mm from entering the system. At the same time, the slim 90mm diameter allows you to install it easily even in narrow boreholes.

Pumping Performance

Cover every irrigation need for your garden or water supply needs with stable pressure. The use of 16 floating impellers allows the pumping of clean water to an impressive height of 75 meters, while the IPX8 waterproof protection guarantees absolute safety during submersion up to 7 meters, offering you a reliable solution during periods of drought.

Specifications

  • Power supply: 230V
  • Power: 750W
  • Water flow: 5700 l/h (95 l/min)
  • Maximum immersion depth: 7m
  • Maximum pumping height: 75m
  • Connection diameter: 1 1/4" (50mm)
  • Outer pump diameter: 90mm (3.5")
  • Power cable length: 18m
  • Construction material: Stainless steel
  • Protection rating: IPX8
  • Maximum water temperature: 35°C
  • Weight: 14.5 kg

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Engine
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Power
750 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
18 m

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
1 1/4"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
75 m

Maximum Head Height: 75


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Maximum Output
5 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Pump Submersion Depth
7 m
Maximum Particle Size
50 mm

Maximum Particle Size

Specifies the largest size of solid particles (such as sand, stones, or other impurities) that the device can pump without clogging or being damaged.
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
Yes
Protection Certification
IPX8

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

Those users who have this product can help you

Ask for the product

Description & Specifications

At a glance

  • Powerful 750W motor with a water flow rate of up to 5700 liters per hour.
  • 16 floating impellers ensure a maximum pumping height of up to 75 meters.
  • Durable stainless steel body and IPX8 protection for submersion up to 7 meters.
  • Long 18-meter power cable for convenient connection without the need for extensions.

Durable Construction and Filtration

Protect your investment with a pump designed for long service life. The durable stainless steel body resists corrosion, while the integrated stainless steel mesh prevents particles larger than 0.5mm from entering the system. At the same time, the slim 90mm diameter allows you to install it easily even in narrow boreholes.

Pumping Performance

Cover every irrigation need for your garden or water supply needs with stable pressure. The use of 16 floating impellers allows the pumping of clean water to an impressive height of 75 meters, while the IPX8 waterproof protection guarantees absolute safety during submersion up to 7 meters, offering you a reliable solution during periods of drought.

Specifications

  • Power supply: 230V
  • Power: 750W
  • Water flow: 5700 l/h (95 l/min)
  • Maximum immersion depth: 7m
  • Maximum pumping height: 75m
  • Connection diameter: 1 1/4" (50mm)
  • Outer pump diameter: 90mm (3.5")
  • Power cable length: 18m
  • Construction material: Stainless steel
  • Protection rating: IPX8
  • Maximum water temperature: 35°C
  • Weight: 14.5 kg

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Engine
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Power
750 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
18 m

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
1 1/4"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
75 m

Maximum Head Height: 75


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Maximum Output
5 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Pump Submersion Depth
7 m
Maximum Particle Size
50 mm

Maximum Particle Size

Specifies the largest size of solid particles (such as sand, stones, or other impurities) that the device can pump without clogging or being damaged.
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
Yes
Protection Certification
IPX8

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

354,98 €
32,00 € 37,00 €   shipping cost