Skroutz.cy

DDT Single-Phase Water Pump 0.75hp
Submersible Water Pumps

DDT Single-Phase Water Pump 0.75hp

The DDT submersible water pump model WQDS-0.6 is a reliable and efficient solution for pumping and draining water from wells, fountains, tanks, basements, or irrigation systems. Built with a copper...

The DDT submersible water pump model WQDS-0.6 is a reliable and efficient solution for pumping and draining water from wells, fountains, tanks, basements, or irrigation systems. Built with a copper winding for increased durability and high performance, this pump provides steady flow and good pressure for home or semi-professional use. The powerful 0.75 HP...

See full description See full description

Top specs

  • Horsepower

    Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).

  • Voltage

    Single-Phase

    Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 

  • Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
  • See all
The product is not available for shipping to the selected country.
Review the product
Product report

Description

Description

The DDT submersible water pump model WQDS-0.6 is a reliable and efficient solution for pumping and draining water from wells, fountains, tanks, basements, or irrigation systems. Built with a copper winding for increased durability and high performance, this pump provides steady flow and good pressure for home or semi-professional use. The powerful 0.75 HP motor ensures consistent and efficient operation, while the sealed construction allows direct use in water, making it ideal for draining or water supply.

  • Powerful and efficient 0.6 kW / 0.75 HP motor
  • Copper winding for longer service life
  • Stable flow for fast pumping
  • Durable construction for submersible operation
  • Low energy consumption
  • Ideal for home use, garden use, or drainage

Technical specifications:
Model: WQDS-0.6
Type: Submersible pump
Power: 0.6 kW / 0.75 HP
Voltage: 220 V
Frequency: 50 Hz
Motor speed: 2880 RPM
Rated flow: 3 m³/h
Maximum pumping height: 25 m
Connection diameter: 1 inch
Rated current: 4.8 A
Protection rating: IP68
Insulation class: B
Certification: CE, ISO9001
Winding material: Copper

Recommended uses:
- Wells and fountains
- Garden irrigation
- Draining tanks or reservoirs

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
0.75 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
562.5 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
25 m
Motor Rotation Speed
2880 rpm

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
1"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Output
3 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Pump Submersion Depth
25 m
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
No
Protection Certification
IP68

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

Those users who have this product can help you

Ask for the product

Description & Specifications

The DDT submersible water pump model WQDS-0.6 is a reliable and efficient solution for pumping and draining water from wells, fountains, tanks, basements, or irrigation systems. Built with a copper winding for increased durability and high performance, this pump provides steady flow and good pressure for home or semi-professional use. The powerful 0.75 HP motor ensures consistent and efficient operation, while the sealed construction allows direct use in water, making it ideal for draining or water supply.

  • Powerful and efficient 0.6 kW / 0.75 HP motor
  • Copper winding for longer service life
  • Stable flow for fast pumping
  • Durable construction for submersible operation
  • Low energy consumption
  • Ideal for home use, garden use, or drainage

Technical specifications:
Model: WQDS-0.6
Type: Submersible pump
Power: 0.6 kW / 0.75 HP
Voltage: 220 V
Frequency: 50 Hz
Motor speed: 2880 RPM
Rated flow: 3 m³/h
Maximum pumping height: 25 m
Connection diameter: 1 inch
Rated current: 4.8 A
Protection rating: IP68
Insulation class: B
Certification: CE, ISO9001
Winding material: Copper

Recommended uses:
- Wells and fountains
- Garden irrigation
- Draining tanks or reservoirs

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
0.75 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
562.5 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
25 m
Motor Rotation Speed
2880 rpm

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
1"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Output
3 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Pump Submersion Depth
25 m
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
No
Protection Certification
IP68

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.