Skroutz.cy

CAT DX42B Eccentric Sander 125mm Battery 18V 1x4Ah with Speed Setting
Sanders

CAT DX42B Eccentric Sander 125mm Battery 18V 1x4Ah with Speed Setting

Key features:

  • 18V Brushless Sander
  • Speed 3000-11000/min
  • 125mm & 150mm Discs
  • 4Ah Battery & Bag

You smooth and polish every surface with precision, using the adjustable speed and brushless motor of the CAT DX42B sander.

See full description

Top specs

  • Number of Batteries 1
  • Ah 4 Ah

  • Speed Setting

    Ability to control the rotation speed of the tool.

    1

  • Eccentricity

    Refers to the distance traveled by the rotation of the base/disc from its center (small eccentricity for finishing, large for fast removal).

    2.4

    General sanding, finishing of wood or paint.

  • RPM (Revolutions Per Minute)

    • High speeds → fast material removal
    • Low speeds → finer, more controlled finish

  • Brushless

    Motor without brushes, offering greater autonomy and longer lifespan.
  • Weight (Net) 1400 gr
  • See all

Kit contents

  1. 1x4Ah with Case

    from 175,90 €

  2. Solo

    from 97,89 €

Carrying case

  1. Soft Case

    from 175,90 €

  2. Without

    from 97,89 €

175 90 €
176 Coins 176 Coins
Delivery Wednesday, 23 September
3,50 € to a Skroutz Point or 4,50 € to an address
Do you want it with Free shipping?
Sent from Greece
From Pazis 4.4 (4)
4.4 (4 reviews)
Greece
3 pieces
See Power Tools on the page of Pazis
What if it breaks?

You're covered by the statutory 2-year warranty. Contact us and we'll handle the entire process with the store, ensuring your issue is resolved with prompt support through a repair, replacement, or refund.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Learn more about invoicing
Review the product
Product report

Description

Description

At a glance

  • 18V Brushless Motor: Efficient operation and longer service life.
  • Adjustable Speed: Range of 3,000-11,000/min for versatility in applications.
  • Dual Use: 125mm disc for sanding and 150mm for polishing.
  • Complete Set: Includes 18V 4Ah battery, 20V charger, and tool bag.

Brushless Motor and Adjustable Speed

You carry out sanding and polishing tasks with absolute stability and control. The 18V Brushless motor of the CAT DX42B sander offers increased service life and high performance. At the same time, you can adjust the no-load speed from 3,000 to 11,000 revolutions per minute, adapting the power to the demands of each surface.

125mm & 150mm Disc Flexibility and 4Ah Battery Life

You adjust your tool according to the task, using a 125 mm disc for sanding or a 150 mm disc for polishing. The 2.4 mm orbit diameter ensures a uniform result. In addition, you work comfortably thanks to the 18V 4Ah battery and the DXC2 charger, while storing the entire set in the practical tool bag.

Specifications

  • Manufacturer / Model: CAT / Combo-40 (DX42B)
  • Motor Type: Brushless
  • Operating Voltage: 18 V
  • Disc Diameter: 125 mm (for sanding) / 150 mm (for polishing)
  • Orbit Diameter: 2.4 mm
  • No-Load Speed: 3,000 - 11,000 / min
  • Battery: DXB4 (18V, 4.0Ah)
  • Charger: DXC2 (100-240V ~ 50/60Hz, output 20V / 2.0A)
  • Bag Type: Hand tool bag
  • Net Weight: 3.00 kg

Package Contents

  • 1 x CAT DX42B 18V Sander
  • 1 x CAT DXB4 18V 4Ah Battery
  • 1 x CAT DXC2 Charger
  • 1 x Hand tool bag

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Specifications

Type
Eccentric Sander

Type

Eccentric Sander

For smoothing curved surfaces with a circular smoothing base.
Power Source
Battery

Power Source

The method of supplying power to the tool.
Eccentricity
2.4 mm

Eccentricity: 2.4

Refers to the distance traveled by the rotation of the base/disc from its center (small eccentricity for finishing, large for fast removal).


General sanding, finishing of wood or paint.
Net Weight
1400 gr
Palm Sander
No

Palm Sander

Ergonomic sander that can be easily held by hand, without the need for special support or handles.

Battery Specifications

Number of Batteries
1
Volt
18 V
Ah
4 Ah

Features & Functions

Dust Suction System
No

Dust Suction System

Used for collecting residues during the operation of the tool.
Speed Setting
Yes

Speed Setting

Ability to control the rotation speed of the tool.
Turns
3000 rpm

Turns

  • High speeds → fast material removal
  • Low speeds → finer, more controlled finish
Brushless
Yes

Brushless

Motor without brushes, offering greater autonomy and longer lifespan.
Water Supply
No
Soft Start
No

Soft Start

Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
Brake
No

Brake

Immediately stops the disc when the tool is switched off, for safety and easy abrasive change.
Connection with Vacuum
No

Sandpaper / Belt Specifications

Diameter
125 mm
Velcro
No

Velcro

The abrasive pads can be attached with Velcro (hook-and-loop fastener).

Accessories

Carrying Case
Soft Case
Handle Included
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

Those users who have this product can help you

Ask for the product

Description & Specifications

At a glance

  • 18V Brushless Motor: Efficient operation and longer service life.
  • Adjustable Speed: Range of 3,000-11,000/min for versatility in applications.
  • Dual Use: 125mm disc for sanding and 150mm for polishing.
  • Complete Set: Includes 18V 4Ah battery, 20V charger, and tool bag.

Brushless Motor and Adjustable Speed

You carry out sanding and polishing tasks with absolute stability and control. The 18V Brushless motor of the CAT DX42B sander offers increased service life and high performance. At the same time, you can adjust the no-load speed from 3,000 to 11,000 revolutions per minute, adapting the power to the demands of each surface.

125mm & 150mm Disc Flexibility and 4Ah Battery Life

You adjust your tool according to the task, using a 125 mm disc for sanding or a 150 mm disc for polishing. The 2.4 mm orbit diameter ensures a uniform result. In addition, you work comfortably thanks to the 18V 4Ah battery and the DXC2 charger, while storing the entire set in the practical tool bag.

Specifications

  • Manufacturer / Model: CAT / Combo-40 (DX42B)
  • Motor Type: Brushless
  • Operating Voltage: 18 V
  • Disc Diameter: 125 mm (for sanding) / 150 mm (for polishing)
  • Orbit Diameter: 2.4 mm
  • No-Load Speed: 3,000 - 11,000 / min
  • Battery: DXB4 (18V, 4.0Ah)
  • Charger: DXC2 (100-240V ~ 50/60Hz, output 20V / 2.0A)
  • Bag Type: Hand tool bag
  • Net Weight: 3.00 kg

Package Contents

  • 1 x CAT DX42B 18V Sander
  • 1 x CAT DXB4 18V 4Ah Battery
  • 1 x CAT DXC2 Charger
  • 1 x Hand tool bag

Manufacturer

Manufacturer Details

Warnings & Safety Information

Specifications

Type
Eccentric Sander

Type

Eccentric Sander

For smoothing curved surfaces with a circular smoothing base.
Power Source
Battery

Power Source

The method of supplying power to the tool.
Eccentricity
2.4 mm

Eccentricity: 2.4

Refers to the distance traveled by the rotation of the base/disc from its center (small eccentricity for finishing, large for fast removal).


General sanding, finishing of wood or paint.
Net Weight
1400 gr
Palm Sander
No

Palm Sander

Ergonomic sander that can be easily held by hand, without the need for special support or handles.

Battery Specifications

Number of Batteries
1
Volt
18 V
Ah
4 Ah

Features & Functions

Dust Suction System
No

Dust Suction System

Used for collecting residues during the operation of the tool.
Speed Setting
Yes

Speed Setting

Ability to control the rotation speed of the tool.
Turns
3000 rpm

Turns

  • High speeds → fast material removal
  • Low speeds → finer, more controlled finish
Brushless
Yes

Brushless

Motor without brushes, offering greater autonomy and longer lifespan.
Water Supply
No
Soft Start
No

Soft Start

Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
Brake
No

Brake

Immediately stops the disc when the tool is switched off, for safety and easy abrasive change.
Connection with Vacuum
No

Sandpaper / Belt Specifications

Diameter
125 mm
Velcro
No

Velcro

The abrasive pads can be attached with Velcro (hook-and-loop fastener).

Accessories

Carrying Case
Soft Case
Handle Included
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

175,90 €
3,50 € to a Skroutz Point