Skroutz.cy

CGM 126A IPE Black Matt Motorcycle Helmet Jet ECE 22.06 1200gr with Sun Visor
Motorcycle Helmets

CGM 126A IPE Black Matt Motorcycle Helmet Jet ECE 22.06 1200gr with Sun Visor Code: CGM-126A-BLV-01

The 126 IPE helmet is the ideal choice for the modern rider who commutes daily in the city and is looking for a combination of high aesthetics, low weight, and absolute ergonomics. 

The 126 IPE helmet is the ideal choice for the modern rider who commutes daily in the city and is looking for a combination of high aesthetics, low weight, and absolute ergonomics. 

See Description & Specifications See Description & Specifications

Top specs

  • Type

    Jet

    The jet helmet is lightweight and comfortable as it is easy to put on and take off. It offers great visibility and is cool. However, it lacks in safety compared to a full-face helmet because it leaves a large area of the face uncovered.

  • Material

    Thermoplastic

    This is a plastic material mainly used in more affordable and entry-level helmets.

    Thermoplastic shells, such as Polycarbonate or ABS, offer basic protection through deformation upon impact, with greater weight and lower production cost compared to composite materials.

  • Certification

    Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

    ECE 22.06

    New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.

  • Pinlock (Anti-fog Film)

    Not Supported

    It is not compatible with the Pinlock system, so it cannot be installed. In this case, the helmet does not have the fittings for adding the Pinlock inner visor, which means there is no special protection against fogging or misting of the visor.
  • Color Finish Matt
The product is not available for shipping to the selected country.
Questions
Review the product
Product report

Description & Specifications

The 126 IPE helmet is the ideal choice for the modern rider who commutes daily in the city and is looking for a combination of high aesthetics, low weight, and absolute ergonomics. 

Made from advanced HPT material, it offers excellent protection, while the new ECE-R 22.06 certification guarantees compliance with the strictest European safety standards.

The riding experience is enhanced thanks to the ExtraCool inner lining, which is made with soft, breathable materials, while incorporating special pads and a collar for a stable and comfortable fit. The Air Stream System ventilation system, consisting of a large front air intake and rear air extractors, ensures continuous air renewal, keeping the inside of the helmet always cool.

Maximum visibility is ensured by the long, scratch-resistant quick-release visor and the internal retractable sun visor. Safety is enhanced by High Visibility reflective strips on the back for night riding. In addition, the Ipe features a micrometric closure, an anti-theft ring on the strap, and an elastic retaining loop.

  • Material: Thermoplastic (reinforced high-strength thermoplastic material)
  • Weight: 1200+-50gr
  • Anatomical structure
  • Fade-resistant paint
  • Impact and puncture resistant
  • Internal air mesh for better ventilation of the lining
  • Fully removable, washable, hypoallergenic inner lining with controlled perspiration, made of extremely soft fabric
  • Fully removable, washable pads
  • External scratch-resistant polycarbonate visor
  • The external visor is specially shaped to provide a wide field of vision for the rider
  • Internal smoked sun visor for protection from UV rays
  • One adjustable air vent on the top for air intake
  • Air vents on the rear side for air extraction
  • Adjustable micrometric ratchet buckle
  • Anti-theft ring for locking the helmet
  • European Union specifications ECE R 22.06
  • Supplied with a carry bag

SkuDescription|Brand

Manufacturer Details

Warnings & Safety Information
Product Number
CGM-126A-BLV-01

Dimensions

Type
Jet

Type

Jet

The jet helmet is lightweight and comfortable as it is easy to put on and take off. It offers great visibility and is cool. However, it lacks in safety compared to a full-face helmet because it leaves a large area of the face uncovered.
Weight (+/-50 gr)
1200 gr

Weight (+/-50 gr)

Most helmets weigh around 1500gr and some can reach up to 1800gr. Additionally, the material is also an important factor for the weight of the helmet, with carbon helmets being considered lighter.
Colour
Black
Color Finish
Matt
Material
Thermoplastic

Material

Thermoplastic

This is a plastic material mainly used in more affordable and entry-level helmets.

Thermoplastic shells, such as Polycarbonate or ABS, offer basic protection through deformation upon impact, with greater weight and lower production cost compared to composite materials.
Clasp
Microlock

Clasp

Microlock

The helmet has a retractable mechanism that fastens on the other side. 2. With this mechanism, we can easily put on and take off the helmet. 3. Compared to the Double D ring, it is less durable and more prone to breakage.
Certification
ECE 22.06

Certification

Certification refers to the official inspection that confirms the helmet meets specific safety standards as defined by international organizations (e.g., ECE, DOT). It is an indication that the helmet has been tested and approved for its ability to protect in real collision conditions.

ECE 22.06

New European-type safety specification certification "ECE 22.06", which ensures that the helmet is tested at 18 impact check points instead of 6 as was previously the case. It is now considered the most modern and comprehensive standard for helmet safety in Europe.
Pinlock (Anti-fog Film)
Not Supported

Pinlock (Anti-fog Film)

Not Supported

It is not compatible with the Pinlock system, so it cannot be installed. In this case, the helmet does not have the fittings for adding the Pinlock inner visor, which means there is no special protection against fogging or misting of the visor.

Extra Features

Removable / Washable Interior
Yes

Removable / Washable Interior

The helmet's interior lining can be removed and washed.
Sun Visor
Yes

Sun Visor

The helmet has an internal sun visor which is usually pulled down from the left side of the helmet for protection from the sun.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.