The Light4me Wash light bar is a wall washer type and features 192 RGB SMD5050 LEDs divided into 16 sections. It produces dynamic and static effects and supports DMX control, automatic operation, master/slave synchronisation and sound activation.
Brightness can be adjusted linearly from 0 to 100%, and the strobe effect has an adjustable frequency. It can also be controlled using a wireless infrared remote control, while the LED display and four buttons are used for settings. The housing is made of aluminium and features a milky LED cover and two mounting brackets.
- Lighting type: Wash, wall washer LED bar
- Light source: 192 RGB SMD5050 LEDs, 1.5 W each
- LED sections: 16
- Colours: RGB, red, green, blue, yellow, purple, cyan and white
- Dynamic effects: 28, with fade effects and adjustable speed
- Automatic programmes: 3, with fade effects and adjustable speed
- Static colours: 7
- Dimmer: Linear, full range 0–100%
- Strobe effect: Adjustable frequency
- Modes: DMX, auto, master/slave and sound
- Control: DMX, automatic, manual and wireless infrared (IR) remote control
- Microphone sensitivity: Adjustable
- DMX channels: 2/3/4/8/14/24/48
- DMX connections: 3-pin XLR in/out
- Power connections: IEC (C14) male input and IEC (C13) female output
- Power supply: AC 100–240 V, 50/60 Hz
- Power consumption: 71 W
- Fuse: 5 A/250 V
- Beam angle: 40°
- Housing material: Aluminium
- Housing colour: Black
- LED cover: Milky
- Mounting brackets: 2
- Use: Indoor
- Operating temperature: -20 to 45 °C
- Operating humidity: 0–90%
- Protection rating: IP20
- Dimensions: 107 × 6.5 × 8.8 cm
- Net weight: 4 kg
- Type
- -
- Lighting Mode
- Wash
- LED
- Yes
- PAR
- No
- Robotic Head
- No
- Battery
- No
- DMX
- Yes
- Light Tint
- RGB, Red, Blue, Yellow, Purple
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.