ANYCUBIC ABS-Like 3.0 resin is a photopolymer resin designed for LCD and DLP 3D printers. It is characterized by:

• High mechanical strength
• Crack resistance
• High printing accuracy
• Elongation at break 25–30%
• Impact resistance 130 J/m
• Low volumetric shrinkage rate (3.9–4.9%)
• Hardness 83–86 HD
• Viscosity 280–300 mPa·s (25°C)
• Density 1.06–1.09 g/cm³
• Tensile strength 38–45 MPa
• Bending modulus 50–65 MPa
• Flexural strength 1500–2000 MPa
• Young's modulus 1300–1700 MPa
• Izod impact resistance 130 J/m
• Printing temperature 20–50 °C
• Weight 1 kg

The resin has good flow and low shrinkage, allowing accurate reproduction of details and a smooth surface finish. It is compatible with printers that use ultraviolet light with a wavelength between 365 and 405 nm.