Skroutz.cy

GeHock Waste Water / Sewage Pump 1hp with Float Switch QSPD0750
Submersible Water Pumps

GeHock Waste Water / Sewage Pump 1hp with Float Switch QSPD0750

Key features:

  • 750W power for immediate pumping
  • 100% durable stainless steel body
  • Flow rate up to 16,000L per hour
  • Automatic control with float switch
See full description

Top specs

  • Horsepower

    Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).

  • Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

  • Manometric Height

    8

    The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

    • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
    • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
  • See all
114 45 €
115 Coins 115 Coins
Delivery Wed, 09 Sep - Tue, 15 Sep
7,50 € to a Skroutz Point or 8,50 € to an address
Do you want it with 2,50 € shipping to Skroutz Point?
Sent from Greece
From Tafmarket
Greece
10 pieces
See Water Pumps on the page of Tafmarket
What if it breaks?

You're covered by the statutory 2-year warranty. Contact us and we'll handle the entire process with the store, ensuring your issue is resolved with prompt support through a repair, replacement, or refund.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Learn more about invoicing
Review the product
Product report

Description

Description

Handle every wastewater pumping demand with the GeHOCK QSPD0750 submersible pump, equipped with an Inox stainless steel construction and an automatic float switch.

At a glance

  • 750W Power: 1HP motor for rapid removal of dirty water in demanding conditions.
  • Inox Body: Stainless steel construction with maximum resistance to corrosion and chemicals.
  • Flow Rate 16,000 L/h: High capacity for moving large volumes of water with a head of up to 8 meters.
  • Automatic float switch operation: Level control and protection of the mechanism from dry running.

Sturdy Inox Heavy Duty Construction

Forget the wear and tear caused by corrosion and stagnant water. The body of the GeHOCK QSPD0750 is made of Inox Heavy Duty stainless steel, ensuring top durability against dirty wastewater. At the same time, the Inox structure provides optimal heat dissipation, allowing you to keep the pump submerged in the pit for long periods without any risk.

Automatic control with Float Switch

You don’t need to worry about sudden downpours or rising water levels in the basement. Automatic Float Switch technology turns the device on and off automatically depending on the water level. This way, you avoid the hassle of manual control, while the 750W motor is effectively protected from dry running, which could cause damage.

Absolute Protection Thermal Overload & 35mm Passage

Handle even the toughest wastewater with particles up to 35mm without fear of clogging. The pump features an integrated Thermal Overload Protection system that monitors the motor temperature and cuts off the power supply in the event of overheating. You can always have peace of mind, knowing that your equipment is completely safe in every use.

Specifications

  • Motor power: 750W (1.0 HP)
  • Operating voltage: 220-240V / 50Hz
  • Maximum flow rate: 16,000 l/h (16 m³/h)
  • Maximum head: 8 m
  • Maximum immersion depth: 7 m
  • Body material: Stainless steel (Inox)
  • Maximum particle size: 35 mm
  • Outlet connection: 1" - 1 1/4" - 1 1/2" (multiple options)
  • Protection rating: IPX8
  • Power cable length: 10 m
  • Maximum liquid temperature: 35°C

Package Contents

  • Submersible pump GeHOCK QSPD0750 (Stainless Steel)
  • Built-in float switch
  • 10-meter power cable

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Waste Water / Sewage

Type

Waste Water / Sewage

Waste water / sewage pumps are used for pumping and transporting waste water, sewage, and other liquids containing solids or particles
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Horsepower
1 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
750 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
10 m

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
Yes

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
8 m

Maximum Head Height: 8


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Maximum Output
16 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Pump Submersion Depth
7 m
Maximum Particle Size
35 mm

Maximum Particle Size

Specifies the largest size of solid particles (such as sand, stones, or other impurities) that the device can pump without clogging or being damaged.
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
Yes
Protection Certification
IPX8

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

Those users who have this product can help you

Ask for the product

Description & Specifications

Handle every wastewater pumping demand with the GeHOCK QSPD0750 submersible pump, equipped with an Inox stainless steel construction and an automatic float switch.

At a glance

  • 750W Power: 1HP motor for rapid removal of dirty water in demanding conditions.
  • Inox Body: Stainless steel construction with maximum resistance to corrosion and chemicals.
  • Flow Rate 16,000 L/h: High capacity for moving large volumes of water with a head of up to 8 meters.
  • Automatic float switch operation: Level control and protection of the mechanism from dry running.

Sturdy Inox Heavy Duty Construction

Forget the wear and tear caused by corrosion and stagnant water. The body of the GeHOCK QSPD0750 is made of Inox Heavy Duty stainless steel, ensuring top durability against dirty wastewater. At the same time, the Inox structure provides optimal heat dissipation, allowing you to keep the pump submerged in the pit for long periods without any risk.

Automatic control with Float Switch

You don’t need to worry about sudden downpours or rising water levels in the basement. Automatic Float Switch technology turns the device on and off automatically depending on the water level. This way, you avoid the hassle of manual control, while the 750W motor is effectively protected from dry running, which could cause damage.

Absolute Protection Thermal Overload & 35mm Passage

Handle even the toughest wastewater with particles up to 35mm without fear of clogging. The pump features an integrated Thermal Overload Protection system that monitors the motor temperature and cuts off the power supply in the event of overheating. You can always have peace of mind, knowing that your equipment is completely safe in every use.

Specifications

  • Motor power: 750W (1.0 HP)
  • Operating voltage: 220-240V / 50Hz
  • Maximum flow rate: 16,000 l/h (16 m³/h)
  • Maximum head: 8 m
  • Maximum immersion depth: 7 m
  • Body material: Stainless steel (Inox)
  • Maximum particle size: 35 mm
  • Outlet connection: 1" - 1 1/4" - 1 1/2" (multiple options)
  • Protection rating: IPX8
  • Power cable length: 10 m
  • Maximum liquid temperature: 35°C

Package Contents

  • Submersible pump GeHOCK QSPD0750 (Stainless Steel)
  • Built-in float switch
  • 10-meter power cable

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Waste Water / Sewage

Type

Waste Water / Sewage

Waste water / sewage pumps are used for pumping and transporting waste water, sewage, and other liquids containing solids or particles
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Horsepower
1 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
750 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
10 m

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
Yes

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
8 m

Maximum Head Height: 8


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Maximum Output
16 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Pump Submersion Depth
7 m
Maximum Particle Size
35 mm

Maximum Particle Size

Specifies the largest size of solid particles (such as sand, stones, or other impurities) that the device can pump without clogging or being damaged.
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
Yes
Protection Certification
IPX8

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

114,45 €
7,50 € to a Skroutz Point
or   8,50 €   shipping cost