ACRYLIC PRIMER PAINTER FOR WOOD AND METAL SOLIDPAINT OCCUPANCY PAINT 212 1L

Two-component epoxy primer colored with zinc phosphate and cured with polyaminoamine.

Used for:

• Infrastructure constructions
• Industrial constructions
• Mechanical industry and shipbuilding
• Temporary protection
• Concrete protection

Main advantages of the paint:

• Very high resistance to chemical agents, including solutions of acids, alkalis, gasoline, diesel
• Very high resistance to mechanical impacts
• Water resistant
• Resistant to flammable substances
• Resistant to temperatures up to 120 °C (temporary increase up to 160 °C)
• Increased stain resistance
• High performance
• Resistant to aggressive urban, marine, and industrial atmospheres
• Can be applied on steel or concrete substrates

Application instructions for use on concrete:

• Preparation paint: The first coat is SolidPaint 212 with addition of Solid Thinner 92.
• Ratio for an area of approximately 10 m²:
• Base: 1 liter
• Hardener: 0.44 liters
• Solvent: 0.4 liters
• Weight:
• Base: 1500 g
• Hardener: 390 g
• Solvent: 600 g

One package is sufficient to paint an area up to 3 m² with a finishing thickness of 200 microns.

Note: Paint consumption depends on the absorbency of the concrete and the thickness of the protection layer.

To achieve the floor effect, you must:

• Sprinkle the SOLID decorative flakes on the fresh paint.
• Wait 8 hours.
• Protect the surface with the Sigmadur Clearcoat polyurethane resin.

Technical data:

• Tack-free time: 2 hours
• Application of second coat at 20°C: 8 hours
• Solid content: 60%
• Recommended film thickness: 50–120 μm
• Spread rate at 50 μm: 12 m²/l
• Gloss: Semi-gloss
• Recommended thinner: Solid thinner 92
• Full curing: 7 days

Only with colors from the RAL chart, the colors in the reference chart may slightly differ from the actual ones due to screen resolution.

The product is painted in the color ordered and is non-returnable. Careful color selection is required at purchase.

For safe use in closed and poorly ventilated spaces, the use of a mask is recommended due to the volatile solvent odor.

Sets are also available in 14.4L packaging.