Color: Yellow (RAL 1018)

Finish: Glossy

Capacity: 400 ml

Fast drying: approximately 20 minutes at 20°C

Theoretical coverage area: up to 2 m² per aerosol can

Formula: based on modified acrylic and alkyd resins

Durability: UV and weather resistant

Does not contain: lead, chromium, or ozone-depleting compounds

Available in selected colors according to the RAL standard.

Recommended applications:

• Metal painting
• Plastics
• Plaster surfaces
• Car bodies
• Bicycles
• Furniture
• Decorative accessories

Excellent adhesion and uniform coverage even on difficult surfaces.

Instructions for use:

• Clean the surface well from dust, grease, and rust. For steel, apply a layer of acrylic primer first.
• Shake the can well for 2 minutes before use.
• Spray from a distance of 20-30 cm in thin, even coats.
• Apply 2-3 coats at short intervals.
• Full drying time is approximately 6 hours.
• After use, clean the valve by turning the can upside down and pressing for 3 seconds.

Recommendations for optimal results:

• Ideal application temperature: 18 – 25 °C
• Recommended dry film thickness: approximately 20 microns
• Test on a small area before final application to check compatibility and adhesion.