Bathroom air grille with a completely new construction and design. It features very low noise during operation, easy installation, and maintenance.

Usage: Installation through wall, window, or short ducts with low pressure loss. The air grilles can be installed both vertically and horizontally. It is designed to operate in a typical indoor environment with a temperature from 0 to +40 °C, for the transport of clean air without dust, fats, chemical vapors, or other impurities.

Body: The body and front panel are made of mechanically durable white thermoplastic ABS with high color resistance. In the INOX version, the body is gray and the front panel is covered with stainless steel. The shaft is made of ABS.

Motor: Wound with a squirrel-cage rotor. Equipped with reinforced sliding bearings for its entire lifetime and a shaft for horizontal installation. The motor has overload protection. The maximum operating temperature is 40 °C. The protection rating is IP44. Power supply 230V / 50 Hz.

Controls: Under the cover, there are accessible controls for adjusting the required delay time and humidity level (for models with appropriate equipment).

Airflow Direction: The direction of the exhaust air flow is from the front panel towards the rear outlet. The airflow direction cannot be changed.

Installation: The air grilles can be installed on the wall or ceiling. For quick and easy installation in plastic ducts, the QUICK FIX GRIP system can be used – expandable levers that spread inside the duct with the help of accessible front screws, stabilizing the air grille in place. The package also includes brackets and screws for standard installation. For this type of installation, the air grille has four holes at the corners of the body (protected by a cover).

Fan: All models are equipped with backdraft shutters to prevent air from the exhaust duct entering the room when the air grille is not in use.

Speed Control: Done with electronic or transformer speed regulators by changing the voltage.

Noise: The noise level is measured at a distance of 2 m along the suction axis with the air grille operating at maximum speed.

Maintenance: The front panel can be easily removed by pulling and rinsed under running water.

Equipment: Models bearing the letter T are equipped with a delay timer with an adjustable delay time in the range of 3-15 minutes (red indicator). Models with the letter H are equipped with automatic humidity control with an adjustable humidity level in the range of 40–90% relative humidity (blue indicator) and also include delay timer functionality.

Indicators: The switch lock is indicated by three lights on the air grille cover. For models with letters T and H, the lights are on during the control phase of the auxiliary terminal.

• Power Supply [V / Hz]: 230/50
• Power Consumption [W]: 20
• Airflow [m³/h]: 190
• Speed [rpm]: 2450
• Static Pressure [Pa]: 49
• Sound Level [dB / 3m]: 42
• Maximum Temperature [°C]: 40
• Weight [kg]: 0.85
• Protection [IP]: X4
• Diameter [mm]: 120