Skroutz.cy

Ruris Aqua 105 – 1500 W Borehole Submersible Pump 140 M Delivery Head Stainless Steel 30 M Cable Ip68
Submersible Water Pumps

Ruris Aqua 105 – 1500 W Borehole Submersible Pump 140 M Delivery Head Stainless Steel 30 M Cable Ip68

The RURIS Aqua 105 submersible pump is designed for very deep wells: the 1500 W motor and the 3-stage pump offer an excellent lift of 140 m with a flow rate of 2.6 m³/h. It features a 4-inch stainless...

The RURIS Aqua 105 submersible pump is designed for very deep wells: the 1500 W motor and the 3-stage pump offer an excellent lift of 140 m with a flow rate of 2.6 m³/h. It features a 4-inch stainless steel body and a motor with an oil-immersed ratio, 100% copper winding (IP68) for increased durability. A control panel and a 30 m power cable are included.

  • ...
See full description See full description

Top specs

  • Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

  • Manometric Height

    140

    The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

    • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
    • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
  • See all
The product is not available for shipping to the selected country.
Review the product
Product report

Description

Description

The RURIS Aqua 105 submersible pump is designed for very deep wells: the 1500 W motor and the 3-stage pump offer an excellent lift of 140 m with a flow rate of 2.6 m³/h. It features a 4-inch stainless steel body and a motor with an oil-immersed ratio, 100% copper winding (IP68) for increased durability. A control panel and a 30 m power cable are included.

  • Excellent lift of 140 m: 1500 W motor and 3-stage pump for very deep wells and high pressure.
  • Flow rate 2.6 m³/h: Reliable clean water supply for homes, vacation houses, and demanding irrigation systems.
  • 4-inch stainless steel construction: Oil-immersed cooled motor with 100% copper winding for maximum durability.
  • IP68 protection: Submersion up to 15 m, designed for clean water with particles up to 0.05 mm.
  • Package contents: Pump, control panel, and 30 m power cable for deep installation.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Drilling

Type

Drilling
Drilling pumps are used for pumping water or other liquids from underground boreholes (water sources) to surfaces for various purposes, such as water supply, irrigation, industrial applications
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Power
1500 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
140 m

Maximum Head Height: 140


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Maximum Output
2.6 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Pump Submersion Depth
15 m
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
Yes
Stainless
Yes
Protection Certification
IP68

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

Those users who have this product can help you

Ask for the product

Description & Specifications

The RURIS Aqua 105 submersible pump is designed for very deep wells: the 1500 W motor and the 3-stage pump offer an excellent lift of 140 m with a flow rate of 2.6 m³/h. It features a 4-inch stainless steel body and a motor with an oil-immersed ratio, 100% copper winding (IP68) for increased durability. A control panel and a 30 m power cable are included.

  • Excellent lift of 140 m: 1500 W motor and 3-stage pump for very deep wells and high pressure.
  • Flow rate 2.6 m³/h: Reliable clean water supply for homes, vacation houses, and demanding irrigation systems.
  • 4-inch stainless steel construction: Oil-immersed cooled motor with 100% copper winding for maximum durability.
  • IP68 protection: Submersion up to 15 m, designed for clean water with particles up to 0.05 mm.
  • Package contents: Pump, control panel, and 30 m power cable for deep installation.

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Drilling

Type

Drilling
Drilling pumps are used for pumping water or other liquids from underground boreholes (water sources) to surfaces for various purposes, such as water supply, irrigation, industrial applications
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Power
1500 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
140 m

Maximum Head Height: 140


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Maximum Output
2.6 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Pump Submersion Depth
15 m
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
Yes
Stainless
Yes
Protection Certification
IP68

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.