Skroutz.cy

Ruris Aqua 104 – 1100 W Borehole Submersible Pump 100 M Delivery Head 30 M Cable Control Panel Included
Submersible Water Pumps

Ruris Aqua 104 – 1100 W Borehole Submersible Pump 100 M Delivery Head 30 M Cable Control Panel Included

The RURIS Aqua 104 is a submersible water pump that supplies clean water to homes and irrigation systems from deep coastal and well sources. Its 1100 W screw-type motor offers a lift height of 100 m...

The RURIS Aqua 104 is a submersible water pump that supplies clean water to homes and irrigation systems from deep coastal and well sources. Its 1100 W screw-type motor offers a lift height of 100 m with a flow rate of 1.8 m³/h. It is constructed from 4-inch stainless steel, with an oil-cooled submersible motor featuring 100% copper winding (IP68). Includes...

See full description See full description

Top specs

  • Horsepower

    Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).

  • Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

  • Manometric Height

    100

    The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

    • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
    • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
  • See all
The product is not available for shipping to the selected country.
Review the product
Product report

Description

Description

The RURIS Aqua 104 is a submersible water pump that supplies clean water to homes and irrigation systems from deep coastal and well sources. Its 1100 W screw-type motor offers a lift height of 100 m with a flow rate of 1.8 m³/h. It is constructed from 4-inch stainless steel, with an oil-cooled submersible motor featuring 100% copper winding (IP68). Includes a control panel and a 30 m power cable.

  • 100 m lift height: 1100 W screw-type motor providing 1.8 m³/h flow, ideal for deep wells and coastal sources.
  • Home and agricultural use: Supplies clean water for homes and irrigation, compatible with booster systems.
  • 4-inch stainless steel construction: Oil-cooled motor with 100% copper winding and IP68 protection for long-term use.
  • Stable flow at depth: Designed for clean water (particles up to 0.05 mm), capable of submersion up to 15 m.
  • Package contents: Pump, control panel, and long 30 m power cable for flexible installation.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Drilling

Type

Drilling
Drilling pumps are used for pumping water or other liquids from underground boreholes (water sources) to surfaces for various purposes, such as water supply, irrigation, industrial applications
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Horsepower
1.46 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
1095 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
30 m

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
100 m

Maximum Head Height: 100


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Maximum Output
1 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Pump Submersion Depth
15 m
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
Yes
Stainless
Yes
Protection Certification
IP68

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

Those users who have this product can help you

Ask for the product

Description & Specifications

The RURIS Aqua 104 is a submersible water pump that supplies clean water to homes and irrigation systems from deep coastal and well sources. Its 1100 W screw-type motor offers a lift height of 100 m with a flow rate of 1.8 m³/h. It is constructed from 4-inch stainless steel, with an oil-cooled submersible motor featuring 100% copper winding (IP68). Includes a control panel and a 30 m power cable.

  • 100 m lift height: 1100 W screw-type motor providing 1.8 m³/h flow, ideal for deep wells and coastal sources.
  • Home and agricultural use: Supplies clean water for homes and irrigation, compatible with booster systems.
  • 4-inch stainless steel construction: Oil-cooled motor with 100% copper winding and IP68 protection for long-term use.
  • Stable flow at depth: Designed for clean water (particles up to 0.05 mm), capable of submersion up to 15 m.
  • Package contents: Pump, control panel, and long 30 m power cable for flexible installation.

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Drilling

Type

Drilling
Drilling pumps are used for pumping water or other liquids from underground boreholes (water sources) to surfaces for various purposes, such as water supply, irrigation, industrial applications
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Horsepower
1.46 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
1095 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
30 m

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
100 m

Maximum Head Height: 100


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Maximum Output
1 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Pump Submersion Depth
15 m
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
Yes
Stainless
Yes
Protection Certification
IP68

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.