Double Zebra Roller Blind
Recommended Measuring Instructions:
- Above the window: Add 15cm to the total height of the window and 20cm to the total width. The width of the fabric will be 3.5cm smaller than the total width of the roller.
- Inside a window recess (Frame): Measure the internal dimensions of the recess and subtract 1 centimeter from both right and left sides.
If the window opens inward, the roller can be installed inside the frame only if there is a gap between the opening window and the top part of the frame. Otherwise, the roller must be installed above the frame, on the wall.
Control Position (chain): The position of the control depends on personal preference. It is usually placed on the hinge side.
Rolling Direction: The rolling of the fabric depends on the presence of a protruding handle. If there is a protrusion, the rolling should be away from the wall. Otherwise, it can be towards the wall side.
Notes:
- The shade may vary slightly from that of the fabric due to different color rendering on the screen.
- The width of the fabric is 3.5cm smaller than the total width of the roller.
- The weight bar of the fabric is covered with the same fabric as the roller.
- Total packaging weight: Approximately 2kg.
Specifications
- Pattern
- Monochrome
- Colour
- Red
- Blackout
- Partial Blackout
- Double
- Yes
Dimensions
- Dimension
- 100x120 cm
- Width
- 100 cm
- Height
- 120 cm
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.