Skroutz.cy

QiDi Q2 Standalone 3D Printer Dual Extruder with Ethernet / USB Connectivity
3D Printers

QiDi Q2 Standalone 3D Printer Dual Extruder with Ethernet / USB Connectivity

The Qidi Q2 3D printer is an advanced device based on the CoreXY architecture, with a print volume of 270 270 256 mm and print speed up to 600 mm/s. It delivers a nozzle temperature of up to 370°C...

The Qidi Q2 3D printer is an advanced device based on the CoreXY architecture, with a print volume of 270 270 256 mm and print speed up to 600 mm/s. It delivers a nozzle temperature of up to 370°C and an enclosed chamber with active heating up to 65°C, allowing the use of basic filaments such as PLA and more demanding technical materials.

The automatic...

See full description See full description

Top specs

  • Consumable

    Filament

    Plastic filament (e.g. PLA, ABS, PETG) that is heated, melted, and deposited layer by layer to create objects in FDM 3D printers. Inexpensive, easy to use, wide variety of materials.

  • Type

    Standalone

    3D printer ready to use with minimal setup.
  • Connectivity Ethernet, USB
  • See all
562 83 €
563 Coins 563 Coins
Delivery Tomorrow
45,00 € shipping cost
Do you want it with 5,00 € shipping discount?
Sent from Romania
From eFIRE 4.8 (3)
4.8 (3 reviews)
Romania
1 piece
See 3D Printers & Accessories on the page of eFIRE
What if it breaks?

You're covered by the statutory 2-year warranty. Contact us and we'll handle the entire process with the store, ensuring your issue is resolved with prompt support through a repair, replacement, or refund.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Learn more about invoicing
Review the product
Product report

Description

Description

The Qidi Q2 3D printer is an advanced device based on the CoreXY architecture, with a print volume of 270 × 270 × 256 mm and print speed up to 600 mm/s. It delivers a nozzle temperature of up to 370°C and an enclosed chamber with active heating up to 65°C, allowing the use of basic filaments such as PLA and more demanding technical materials.

The automatic offset-free leveling ensures an accurate first layer, reducing errors and improving model adhesion. The revolutionary design and speed of the printer enable rapid production of models, especially for complex geometries.

  • Detailed print creation: The new 1.5GT belt improves motion accuracy and reduces vibrations.
  • Stable construction: The metal CoreXY frame ensures high rigidity and wear resistance.
  • Ready for technical materials: Heated chamber up to 65°C maintains stable temperature conditions.
  • High-temperature print head: Reaches 370°C, helping print a wide range of filaments.
  • Print monitoring: Built-in AI camera monitors the printing process and detects errors.
  • Operational safety: Filtration system reduces dust and odors, providing comfort.

Manufacturer: QIDI

Model: Q2

Print technology: FDM

Kinematics: CoreXY

Device dimensions: 402 × 438 × 494 mm

Weight: 25 kg

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Type
Standalone

Type

Standalone

3D printer ready to use with minimal setup.
Extruder
Dual

Extruder

Thread extrusion mechanism. The dual and triple extruder help with printing in multiple colors and simultaneous printing of designs.
Consumable
Filament

Consumable

Filament

Plastic filament (e.g. PLA, ABS, PETG) that is heated, melted, and deposited layer by layer to create objects in FDM 3D printers. Inexpensive, easy to use, wide variety of materials.
Printing Technology
-
Auto-Leveling
No

Auto-Leveling

It is a system that automatically measures the surface of the print bed and adjusts the nozzle height, so that the first layer is properly laid without manual calibration.
Camera
No

Camera

The camera in 3D printers allows remote monitoring of the printing process in real time and checking for potential issues without physical presence.
Connectivity
Ethernet, USB
Nozzle Temperature
65 °C
Fully Enclosed
-

Fully Enclosed

The term Fully Enclosed refers to printers with a completely sealed chamber (panels, door, lid), which traps heat and prevents drafts. It is essential for avoiding warping in "difficult" materials such as ABS and ASA, while also reducing noise and odors.
Card Reader
No
Weight
4.35 kg

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

2 users have this product and can help you

Ask for the product

Description & Specifications

The Qidi Q2 3D printer is an advanced device based on the CoreXY architecture, with a print volume of 270 × 270 × 256 mm and print speed up to 600 mm/s. It delivers a nozzle temperature of up to 370°C and an enclosed chamber with active heating up to 65°C, allowing the use of basic filaments such as PLA and more demanding technical materials.

The automatic offset-free leveling ensures an accurate first layer, reducing errors and improving model adhesion. The revolutionary design and speed of the printer enable rapid production of models, especially for complex geometries.

  • Detailed print creation: The new 1.5GT belt improves motion accuracy and reduces vibrations.
  • Stable construction: The metal CoreXY frame ensures high rigidity and wear resistance.
  • Ready for technical materials: Heated chamber up to 65°C maintains stable temperature conditions.
  • High-temperature print head: Reaches 370°C, helping print a wide range of filaments.
  • Print monitoring: Built-in AI camera monitors the printing process and detects errors.
  • Operational safety: Filtration system reduces dust and odors, providing comfort.

Manufacturer: QIDI

Model: Q2

Print technology: FDM

Kinematics: CoreXY

Device dimensions: 402 × 438 × 494 mm

Weight: 25 kg

Manufacturer

Manufacturer Details

Warnings & Safety Information
Type
Standalone

Type

Standalone

3D printer ready to use with minimal setup.
Extruder
Dual

Extruder

Thread extrusion mechanism. The dual and triple extruder help with printing in multiple colors and simultaneous printing of designs.
Consumable
Filament

Consumable

Filament

Plastic filament (e.g. PLA, ABS, PETG) that is heated, melted, and deposited layer by layer to create objects in FDM 3D printers. Inexpensive, easy to use, wide variety of materials.
Printing Technology
-
Auto-Leveling
No

Auto-Leveling

It is a system that automatically measures the surface of the print bed and adjusts the nozzle height, so that the first layer is properly laid without manual calibration.
Camera
No

Camera

The camera in 3D printers allows remote monitoring of the printing process in real time and checking for potential issues without physical presence.
Connectivity
Ethernet, USB
Nozzle Temperature
65 °C
Fully Enclosed
-

Fully Enclosed

The term Fully Enclosed refers to printers with a completely sealed chamber (panels, door, lid), which traps heat and prevents drafts. It is essential for avoiding warping in "difficult" materials such as ABS and ASA, while also reducing noise and odors.
Card Reader
No
Weight
4.35 kg

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

562,83 €
45,00 € 50,00 €   shipping cost