Description

Ready-made industrial mortar based on grey Portland cement, graded aggregates from Dionysos marble, and special additives to improve adhesion on difficult surfaces and enhance its rheological properties. It does not contain lime. It requires mixing only with water, reducing preparation time and increasing application speed.

Uses

• Used for filling and leveling floors.
• Provides a ready final surface for the installation of ceramic tiles, marble, or granite.
• Suitable for use in indoor and outdoor areas.
• Does not crack and provides a hard final surface.
• Recommended for thicknesses from 1 to 3 cm.

Advantages

• Very high strength.
• Excellent adhesion.
• Resistance to moisture and frost.
• Prevention of cracking.
• Excellent final surface.
• Indoor and outdoor use.
• Fast preparation and ease of application.
• Excellent workability.
• Consistent quality.

Application Method

• Check the substrate to ensure it is clean, dry, and free of oils or foreign bodies.
• In a clean container, add 5 - 5.5 kg of water and gradually empty the contents of the bag while stirring continuously.
• It is necessary to wet the surfaces with water before and after application.
• The mortar is applied at a thickness of 1 - 3 cm.
• You can walk on the floor after 12 hours and tiling can be done after 48 hours.

Specifications

• European Standard EN 13813 (CT-C7-F2).
• Grain size: 3 mm.
• Fresh mortar specific weight: 1950 kg/m³.
• Compressive strength at 28 days: 10.0 MPa.
• Flexural strength at 28 days: 2.0 MPa.
• Application temperature: +5°C to +35°C.

Packaging

• In 25 kg bags.
• On a pallet of 1400 kg, 35 paper bags of 40 kg.
• Bulk in silos with a capacity of 12 - 18 - 22 m³.

Storage

In unopened packaging, in a dry environment, for 12 months from the date of production.

Consumption

You need approximately 16 - 18 kg of mortar per m² for 1 cm thickness.

Hazard

Hazard statements: H315, H318, H335, H317.