High-quality spray with elasticity and a nitro-combi formulation, suitable for worn surfaces made of artificial and natural leather, vinyl, and plastics.

• Easy to use
• Very good coverage and high yield
• Flexible layer
• Good adhesion
• Retains the original texture

Physical and chemical characteristics:

• Base of auxiliary components: nitro-combi base
• Odor: solvent
• Gloss level: 30-35 units (measured at a 60° angle according to DIN 67530)
• Coverage depends on the condition and color of the surface
• 400 ml covers approximately 1.25-1.75 m²
• 200 ml covers approximately 0.6-0.8 m²
• Drying time (at 20°C, 50% relative humidity):
• dust-free: after about 10 minutes
• touch dry: after about 10-20 minutes
• Temperature resistance: up to 110°C
• Storage: up to 10 years under favorable conditions: 10°-25°C, maximum 60% relative humidity
• Packaging: 400 ml and 200 ml

Use:

Read the instructions on the packaging carefully before use. The surface must be smooth, clean, dry, and degreased. The aerosol should be at room temperature. The best working temperature is between 15 and 25°C. Shake the can before use. Test the spray. Apply several thin coats at intervals of 3 to 5 minutes from a distance of 25-30 cm. Do not apply over synthetic paints!