Διάφορα Περιφερειακών

Peladn S-1 Docking Station Thunderbolt 3 6972410024157

Ο σταθμός σύνδεσης eGPU Peladn S-1 συνδέεται σε υπολογιστή μέσω Thunderbolt 3 και υποστηρίζει εξωτερική κάρτα γραφικών, ενισχύοντας τις δυνατότητες γραφικής επεξεργασίας του συστήματος. Η ανοιχτή...

Ο σταθμός σύνδεσης eGPU Peladn S-1 συνδέεται σε υπολογιστή μέσω Thunderbolt 3 και υποστηρίζει εξωτερική κάρτα γραφικών, ενισχύοντας τις δυνατότητες γραφικής επεξεργασίας του συστήματος. Η ανοιχτή σχεδίασή του διευκολύνει την εγκατάσταση και την αναβάθμιση εξαρτημάτων, ενώ βοηθά στην απαγωγή θερμότητας. Διαθέτει επίσης υποδοχή M.2 NVMe και θύρα Gigabit...

Δες όλη την περιγραφή Δες όλη την περιγραφή
149 22 €
Παράδοση Παρ, 04 Δεκ - Τρί, 08 Δεκ
3,50 € σε Skroutz Point ή 4,50 € σε διεύθυνση
Το θέλεις με Δωρεάν μεταφορικά;
Αποστέλλεται από Ελλάδα
Από Techstores 4,8 (96)
Ελλάδα
2 τεμάχια
Δες Περιφερειακά στη σελίδα του Techstores
Κι αν αλλάξω γνώμη;

Κανένα πρόβλημα, αρκεί να είναι εντός 14 ημερών. Ερχόμαστε εμείς για την παραλαβή ή μπορείς να επιλέξεις το Skroutz Point που σου βολεύει, εντελώς δωρεάν έως 2 φορές τον χρόνο, και σου επιστρέφουμε τα χρήματά σου. Απόκτησε Skroutz Plus για απεριόριστες δωρεάν επιστροφές.

Περιγραφή

Περιγραφή

Ο σταθμός σύνδεσης eGPU Peladn S-1 συνδέεται σε υπολογιστή μέσω Thunderbolt 3 και υποστηρίζει εξωτερική κάρτα γραφικών, ενισχύοντας τις δυνατότητες γραφικής επεξεργασίας του συστήματος. Η ανοιχτή σχεδίασή του διευκολύνει την εγκατάσταση και την αναβάθμιση εξαρτημάτων, ενώ βοηθά στην απαγωγή θερμότητας. Διαθέτει επίσης υποδοχή M.2 NVMe και θύρα Gigabit Ethernet.

Η βάση υποστηρίζει τροφοδοτικά ATX και SFX, τα οποία επιλέγονται ξεχωριστά, καθώς και τις περισσότερες κάρτες γραφικών της αγοράς. Για κάρτες NVIDIA RTX 40 απαιτείται τροφοδοτικό ATX 3.0.

  • Διεπαφή: 2 θύρες Thunderbolt 3 (60 W + 15 W)
  • Εύρος ζώνης: 40 Gb/s
  • Θύρα δικτύου: 1 θύρα Gigabit Ethernet 1000M
  • Υποδοχή μονάδας: 1 υποδοχή M.2 2280 NVMe, έως 2 TB
  • Υποστηριζόμενα τροφοδοτικά: ATX και SFX
  • Υποστηριζόμενες κάρτες γραφικών: Τα περισσότερα διαθέσιμα μοντέλα
  • Συνιστώμενες κάρτες γραφικών AMD: RX570 ή νεότερες
  • Συνιστώμενες κάρτες γραφικών NVIDIA: GTX1060 ή νεότερες
  • Υποστήριξη NVIDIA RTX 40: Με τροφοδοτικό ATX 3.0
  • Υποστήριξη AMD RX 7000: Ναι
  • Απαιτήσεις συστήματος: Windows 10 64-bit ή macOS 10.13.4 και νεότερη έκδοση για κάρτες AMD
  • Απαιτήσεις υπολογιστή: Θύρα Thunderbolt 3 με υποστήριξη eGPU
  • Διαστάσεις: 253 x 162 x 41 mm
  • Περιεχόμενα συσκευασίας: Σταθμός σύνδεσης eGPU, καλώδιο USB 4.0, κατσαβίδι και εγχειρίδιο εγκατάστασης

Κατασκευαστής

Δες όλη την περιγραφή

Χαρακτηριστικά

Χαρακτηριστικά

Χρήση
-

Σημαντική πληροφορία

Τα δεδομένα αυτά συλλέγονται από τις επίσημες σελίδες των προϊόντων. Επιβεβαίωσε τα στοιχεία πριν προχωρήσεις στην τελική αγορά. Εάν παρατηρήσεις κάποιο πρόβλημα μπορείς να το αναφέρεις εδώ.

Δες όλα τα χαρακτηριστικά

Αξιολογήσεις (1)

Αξιολογήσεις

  1. 5 αστέρια
    0
  2. 1
  3. 3 αστέρια
    0
  4. 2 αστέρια
    0
  5. 1 αστέρι
    0
Αξιολόγησε το προϊόν

Εικόνες αξιολογήσεων

Εικόνες αξιολογήσεων
Εικόνες αξιολογήσεων
Εικόνες αξιολογήσεων

Αξιολογήσεις χρηστών

Από Κύπρο

  • Dmitrii_Linikov

    Επιβεβαιωμένη αγορά

    GeForce RTX5070ti works with this dock and my Lenovo P1 gen4. Sometimes I see micro freezes, two or three times during the two weeks I'm using it I had eGPU suddenly disconnnected during a game, but still it is much better experience than trying to play games on a laptop's weak so-called "dedicated" graphics card.

    What could be better:
    - The dock has mounting holes only on a front side, and they are not enough to firmly attach ATX power supply and GPU to the dock. I mean its Ok while everything is standing on a table, but have to be very cautious moving things around. My RTX5070ti has embedded nuts on its back side and it would be great to have them in the dock's back too, but alas.
    - the NVMe bay is not convenient to use
    - the GPU coolers keep spinning when the dock is disconnected from the laptop. So I have to switch off the dock's power supply each time I shut down the laptop.

    Now some troubleshooting notes for those who may use the dock with a laptop similar to mine:

    My laptop has an RTX A2000 built in and that made drivers setup troublesome: Lenovo driver for A2000 does not have RTX5070 in the list of supported hardware, gaming drivers do not list the A2000 and its impossible to install them both at the same time. The solution was to use NVCleanstall utility to add extra VID/PID to one of those drivers' list of supported hardware (I ended up using the Studio driver).

    Another issue with my laptop was that after eGPU drivers installation it kept hanging before Windows boot up each time I boot with eGPU disconnected. This was fixed by switching from "Dedicated graphics" to "Hybrid graphics" mode in BIOS setup.

    Σου φάνηκε χρήσιμη;
  • GeForce RTX5070ti works with this dock and my Lenovo P1 gen4. Sometimes I see micro freezes, two or three times during the two weeks I'm using it I had eGPU suddenly disconnnected during a game, but still it is much better experience than trying to play games on a laptop's weak so-called "dedicated" graphics card.

    What could be better:
    - The dock has mounting holes only on a front side, and they are not enough to firmly attach ATX power supply and GPU to the dock. I mean its Ok while everything is standing on a table, but have to be very cautious moving things around. My RTX5070ti has embedded nuts on its back side and it would be great to have them in the dock's back too, but alas.
    - the NVMe bay is not convenient to use
    - the GPU coolers keep spinning when the dock is disconnected from the laptop. So I have to switch off the dock's power supply each time I shut down the laptop.

    Now some troubleshooting notes for those who may use the dock with a laptop similar to mine:

    My laptop has an RTX A2000 built in and that made drivers setup troublesome: Lenovo driver for A2000 does not have RTX5070 in the list of supported hardware, gaming drivers do not list the A2000 and its impossible to install them both at the same time. The solution was to use NVCleanstall utility to add extra VID/PID to one of those drivers' list of supported hardware (I ended up using the Studio driver).

    Another issue with my laptop was that after eGPU drivers installation it kept hanging before Windows boot up each time I boot with eGPU disconnected. This was fixed by switching from "Dedicated graphics" to "Hybrid graphics" mode in BIOS setup.

    0
  • Δες τα όλα
Ερωτήσεις

Ερωτήσεις

Έχεις απορία για το προϊόν;

3 χρήστες έχουν το προϊόν και μπορούν να σε βοηθήσουν

Ρώτησε για το προϊόν

Περιγραφή & Χαρακτηριστικά

Ο σταθμός σύνδεσης eGPU Peladn S-1 συνδέεται σε υπολογιστή μέσω Thunderbolt 3 και υποστηρίζει εξωτερική κάρτα γραφικών, ενισχύοντας τις δυνατότητες γραφικής επεξεργασίας του συστήματος. Η ανοιχτή σχεδίασή του διευκολύνει την εγκατάσταση και την αναβάθμιση εξαρτημάτων, ενώ βοηθά στην απαγωγή θερμότητας. Διαθέτει επίσης υποδοχή M.2 NVMe και θύρα Gigabit Ethernet.

Η βάση υποστηρίζει τροφοδοτικά ATX και SFX, τα οποία επιλέγονται ξεχωριστά, καθώς και τις περισσότερες κάρτες γραφικών της αγοράς. Για κάρτες NVIDIA RTX 40 απαιτείται τροφοδοτικό ATX 3.0.

  • Διεπαφή: 2 θύρες Thunderbolt 3 (60 W + 15 W)
  • Εύρος ζώνης: 40 Gb/s
  • Θύρα δικτύου: 1 θύρα Gigabit Ethernet 1000M
  • Υποδοχή μονάδας: 1 υποδοχή M.2 2280 NVMe, έως 2 TB
  • Υποστηριζόμενα τροφοδοτικά: ATX και SFX
  • Υποστηριζόμενες κάρτες γραφικών: Τα περισσότερα διαθέσιμα μοντέλα
  • Συνιστώμενες κάρτες γραφικών AMD: RX570 ή νεότερες
  • Συνιστώμενες κάρτες γραφικών NVIDIA: GTX1060 ή νεότερες
  • Υποστήριξη NVIDIA RTX 40: Με τροφοδοτικό ATX 3.0
  • Υποστήριξη AMD RX 7000: Ναι
  • Απαιτήσεις συστήματος: Windows 10 64-bit ή macOS 10.13.4 και νεότερη έκδοση για κάρτες AMD
  • Απαιτήσεις υπολογιστή: Θύρα Thunderbolt 3 με υποστήριξη eGPU
  • Διαστάσεις: 253 x 162 x 41 mm
  • Περιεχόμενα συσκευασίας: Σταθμός σύνδεσης eGPU, καλώδιο USB 4.0, κατσαβίδι και εγχειρίδιο εγκατάστασης

Κατασκευαστής

Χρήση
-

Σημαντική πληροφορία

Τα δεδομένα αυτά συλλέγονται από τις επίσημες σελίδες των προϊόντων. Επιβεβαίωσε τα στοιχεία πριν προχωρήσεις στην τελική αγορά. Εάν παρατηρήσεις κάποιο πρόβλημα μπορείς να το αναφέρεις εδώ.

Αξιολογήσεις (1)

  1. 5 αστέρια
    0
  2. 1
  3. 3 αστέρια
    0
  4. 2 αστέρια
    0
  5. 1 αστέρι
    0
Αξιολόγησε το προϊόν

Εικόνες αξιολογήσεων

Εικόνες αξιολογήσεων
Εικόνες αξιολογήσεων
Εικόνες αξιολογήσεων

Αξιολογήσεις χρηστών

Από Κύπρο

  • Dmitrii_Linikov

    Επιβεβαιωμένη αγορά

    GeForce RTX5070ti works with this dock and my Lenovo P1 gen4. Sometimes I see micro freezes, two or three times during the two weeks I'm using it I had eGPU suddenly disconnnected during a game, but still it is much better experience than trying to play games on a laptop's weak so-called "dedicated" graphics card.

    What could be better:
    - The dock has mounting holes only on a front side, and they are not enough to firmly attach ATX power supply and GPU to the dock. I mean its Ok while everything is standing on a table, but have to be very cautious moving things around. My RTX5070ti has embedded nuts on its back side and it would be great to have them in the dock's back too, but alas.
    - the NVMe bay is not convenient to use
    - the GPU coolers keep spinning when the dock is disconnected from the laptop. So I have to switch off the dock's power supply each time I shut down the laptop.

    Now some troubleshooting notes for those who may use the dock with a laptop similar to mine:

    My laptop has an RTX A2000 built in and that made drivers setup troublesome: Lenovo driver for A2000 does not have RTX5070 in the list of supported hardware, gaming drivers do not list the A2000 and its impossible to install them both at the same time. The solution was to use NVCleanstall utility to add extra VID/PID to one of those drivers' list of supported hardware (I ended up using the Studio driver).

    Another issue with my laptop was that after eGPU drivers installation it kept hanging before Windows boot up each time I boot with eGPU disconnected. This was fixed by switching from "Dedicated graphics" to "Hybrid graphics" mode in BIOS setup.

    Σου φάνηκε χρήσιμη;
  • GeForce RTX5070ti works with this dock and my Lenovo P1 gen4. Sometimes I see micro freezes, two or three times during the two weeks I'm using it I had eGPU suddenly disconnnected during a game, but still it is much better experience than trying to play games on a laptop's weak so-called "dedicated" graphics card.

    What could be better:
    - The dock has mounting holes only on a front side, and they are not enough to firmly attach ATX power supply and GPU to the dock. I mean its Ok while everything is standing on a table, but have to be very cautious moving things around. My RTX5070ti has embedded nuts on its back side and it would be great to have them in the dock's back too, but alas.
    - the NVMe bay is not convenient to use
    - the GPU coolers keep spinning when the dock is disconnected from the laptop. So I have to switch off the dock's power supply each time I shut down the laptop.

    Now some troubleshooting notes for those who may use the dock with a laptop similar to mine:

    My laptop has an RTX A2000 built in and that made drivers setup troublesome: Lenovo driver for A2000 does not have RTX5070 in the list of supported hardware, gaming drivers do not list the A2000 and its impossible to install them both at the same time. The solution was to use NVCleanstall utility to add extra VID/PID to one of those drivers' list of supported hardware (I ended up using the Studio driver).

    Another issue with my laptop was that after eGPU drivers installation it kept hanging before Windows boot up each time I boot with eGPU disconnected. This was fixed by switching from "Dedicated graphics" to "Hybrid graphics" mode in BIOS setup.

    0
  • Δες τα όλα
149,22 €
3,50 € σε Skroutz Point