Bioclima ClimaTop Granite decorative acrylic coating creates a granite effect with coloured aggregates and is intended for interior and exterior walls. It is ready to use without dilution and can be applied as a finishing coat on external thermal insulation systems. The hydrophobic film will not crack when the product is applied correctly.
Suitable for plaster, concrete, cement board, plasterboard and well-adhered painted surfaces. New, porous or cement-based surfaces must first be primed with ClimaTop Primer. Apply with a stainless steel trowel, working from the bottom upwards, after mixing with a low-speed drill. Clean tools immediately after application with warm water and soap or a detergent solution.
- Type: Acrylic, paste-form decorative finishing coat
- Colour: Grey
- Finish: Granite effect
- Sheen: Matt
- Use: Interior and exterior
- Ready to use: Yes, no water required
- Coverage: 4–5 kg/m² per coat
- Application thickness: Approximately the size of the grain
- Water vapour permeability: 150–250 g/(m²·d)
- Touch-dry time: 1–2 hours at 23°C
- Fully dry: 14 days
- Recoat time: 24 hours
- Application temperature: From 5°C to 35°C
- Application relative humidity: Up to 65%
- Weight: 25 kg
Specifications
- Type
- Deco Paint
- Colour
- Grey
- Acrilyc
- Yes
- Luminosity
- Matt
Quantity
- Weight
- 25 kg
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.