Einza Novasol impregnating varnish for exterior wood penetrates the substrate and forms an elastic microfilm while keeping the wood pores open. Its alkyd formula contains resinified castor oil and provides an oak-coloured satin finish. It protects against moisture and ultraviolet radiation, while the film is protected against blue stain fungus.
Apply undiluted with a brush, roller or airless spray gun. Two coats are required on new surfaces. Coverage is 12–14 m²/L per coat on normally absorbent wood. It is touch-dry in approximately 24 hours and fully dry in approximately 3 days. Recoating is possible after drying overnight. Clean tools immediately after use with einzA Lackverdünnung AF or einzA Lackverdünnung-Terpentinersatz.
- Type: Impregnating varnish
- Suitable surface: Wood
- Use: Exterior
- Colour: Oak
- Finish: Satin
- Quantity: 1 L
- Base: Alkyd
- Ingredients: Resinified castor oil and alkyd resins
- Coats: 2 on new surfaces
- Coverage: 12–14 m²/L per coat
- Application: Brush, roller or airless spray gun
- Dilution: Not required
- Touch-dry: Approximately 24 hours
- Fully dry: Approximately 3 days
- Recoating: After drying overnight
- Protection: Against moisture, ultraviolet radiation and blue stain fungus affecting the film
- Tool cleaning: With einzA Lackverdünnung AF or einzA Lackverdünnung-Terpentinersatz
- Product Number
- 0074934
- Type
- Impregnation Varnish
- Surface Material
- of Wood
- Glossiness
- Satin
- Insecticide / Antifungal
- No
- Polyurethane
- No
- 2-Component
- No
- Quantity
- 1 lt
- Colour
- Oak
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.