Skroutz.cy

Einhell Well Pump 750W with Float Switch 4181515
Submersible Water Pumps

Einhell Well Pump 750W with Float Switch 4181515

Category: Submersible Water Pumps

Power: The Einhell Flood Set GE-DP 7535 N LL pump features a 750 W motor, allowing a maximum flow rate of 18,500 L/h and a maximum discharge height of 9 m.

Flood...

Category: Submersible Water Pumps

Power: The Einhell Flood Set GE-DP 7535 N LL pump features a 750 W motor, allowing a maximum flow rate of 18,500 L/h and a maximum discharge height of 9 m.

Flood assistance: In just a few steps, the set is ready for immediate use in case of flooding. The 2-in-1 pump is suitable for clean and dirty water.

Features:

  • Suitable...
See full description See full description

  • Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

  • Manometric Height

    9

    The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

    • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
    • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
  • See all
The product is not available for shipping to the selected country.
Review the product
Product report

Description

Description

Category: Submersible Water Pumps

Power: The Einhell Flood Set GE-DP 7535 N LL pump features a 750 W motor, allowing a maximum flow rate of 18,500 L/h and a maximum discharge height of 9 m.

Flood assistance: In just a few steps, the set is ready for immediate use in case of flooding. The 2-in-1 pump is suitable for clean and dirty water.

Features:

  • Suitable for dirty water with particles up to Ø 35 mm and clean water with the ability to pump down to 1 mm residual water.
  • Quick-connect system for fast hose changes, compatible with 25/38 mm hoses and accessories with a 33.3 mm (G 1") external thread.
  • Low suction mode allows pumping of clean water down to 1 mm residual level, with adjustable suction level in 4 stages up to 35 mm.

Delivery contents: The Einhell Flood Set GE-DP 7535 N LL includes: 1x universal adapter, 1x 10 m fabric hose with 3x quick connections, 1x plastic case, and 1x quick connector.

Transport: Thanks to the integrated carrying handle, the dirty water pump is easy to transport.

Submersion adjustment: With the lifting ring, it can be easily lowered and controlled in clean or dirty water.

Construction: The pump features a durable stainless steel construction and high-quality mechanical seal for corrosion resistance.

Float switch: The float switch allows easy and quick adjustment of the pump’s start level, with adjustable float cable length.

2 in 1: Combined pump suitable for clean and dirty water, with the ability to pump down to 1 mm residual level.

Quick assistance: Specialized set for emergency situations, suitable for pumping water from floods or rain.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Well

Type

Well
They are designed to pump water from underground sources when the water is at a depth, and are mainly used for water supply, irrigation, and other applications in areas that do not have easy access to surface water.
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Power
750 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
9 m

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
Yes

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
1"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
9 m

Maximum Head Height: 9


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Pump Submersion Depth
9 m
Maximum Particle Size
35 mm

Maximum Particle Size

Specifies the largest size of solid particles (such as sand, stones, or other impurities) that the device can pump without clogging or being damaged.
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
Yes
Stainless
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

Those users who have this product can help you

Ask for the product

Description & Specifications

Category: Submersible Water Pumps

Power: The Einhell Flood Set GE-DP 7535 N LL pump features a 750 W motor, allowing a maximum flow rate of 18,500 L/h and a maximum discharge height of 9 m.

Flood assistance: In just a few steps, the set is ready for immediate use in case of flooding. The 2-in-1 pump is suitable for clean and dirty water.

Features:

  • Suitable for dirty water with particles up to Ø 35 mm and clean water with the ability to pump down to 1 mm residual water.
  • Quick-connect system for fast hose changes, compatible with 25/38 mm hoses and accessories with a 33.3 mm (G 1") external thread.
  • Low suction mode allows pumping of clean water down to 1 mm residual level, with adjustable suction level in 4 stages up to 35 mm.

Delivery contents: The Einhell Flood Set GE-DP 7535 N LL includes: 1x universal adapter, 1x 10 m fabric hose with 3x quick connections, 1x plastic case, and 1x quick connector.

Transport: Thanks to the integrated carrying handle, the dirty water pump is easy to transport.

Submersion adjustment: With the lifting ring, it can be easily lowered and controlled in clean or dirty water.

Construction: The pump features a durable stainless steel construction and high-quality mechanical seal for corrosion resistance.

Float switch: The float switch allows easy and quick adjustment of the pump’s start level, with adjustable float cable length.

2 in 1: Combined pump suitable for clean and dirty water, with the ability to pump down to 1 mm residual level.

Quick assistance: Specialized set for emergency situations, suitable for pumping water from floods or rain.

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Well

Type

Well
They are designed to pump water from underground sources when the water is at a depth, and are mainly used for water supply, irrigation, and other applications in areas that do not have easy access to surface water.
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Power
750 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
9 m

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
Yes

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
1"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
9 m

Maximum Head Height: 9


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Pump Submersion Depth
9 m
Maximum Particle Size
35 mm

Maximum Particle Size

Specifies the largest size of solid particles (such as sand, stones, or other impurities) that the device can pump without clogging or being damaged.
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
Yes
Stainless
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

10€ coupon from the shop Unique Noir until 09/07!
10€ coupon from the shop Unique Noir until 09/07!
See more