Skroutz.cy

Dedra Submersible Pump for Waste Water & Rainwater 1.33hp with Float Switch DED8845
Submersible Water Pumps

Dedra Submersible Pump for Waste Water & Rainwater 1.33hp with Float Switch DED8845

Key features:

  • Power 1000W for maximum flow
  • Flow rate 19,500 L/h for speed
  • Pumping dirty & clean water
  • Automatic safety float
See full description

Top specs

  • Horsepower

    Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).

  • Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

  • Manometric Height

    10

    The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

    • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
    • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
  • See all
99 71 €
100 Coins 100 Coins
Delivery Mon, 02 Nov - Fri, 06 Nov
7,50 € to a Skroutz Point or 8,50 € to an address
Do you want it with 5,00 € shipping discount?
Sent from Greece
From Getters 4.6 (110)
4.6 (110 reviews)
Greece
20 pieces
See Water Pumps on the page of Getters
What if it breaks?

You're covered by the statutory 2-year warranty. Contact us and we'll handle the entire process with the store, ensuring your issue is resolved with prompt support through a repair, replacement, or refund.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Learn more about invoicing
Review the product
Product report

Description

Description

Take advantage of the specially reinforced impeller of the DED8845, which allows the passage of solid particles up to 35 millimeters in diameter without blockages.

At a glance

  • Power 1000W: High performance for demanding drainage tasks.

  • Flow Rate 19,500 L/h: Rapid evacuation of large volumes of water.

  • Particle Diameter 35mm: Suitable for heavily contaminated water.

  • Thermal Protection: Mechanism to prevent motor overheating.

Dual Functionality and Power

The Dedra DED8845 pump is designed to meet all your needs, whether for clean or dirty water. With its powerful 1000W motor, you are ensured consistent performance even in tough conditions. Its ability to handle wastewater with solid particles makes it an essential multi-tool for your home or garden, providing you with the necessary reliability for every application.

Automated Operation and Safety

The device features a built-in float switch, which automatically regulates the start and stop of operation depending on the water level. This technology protects your pump from running dry, which could cause damage to the motor. Thus, you can leave it to work autonomously in the sump without needing constant supervision from your side.

Durable Construction and Performance

Made from high-quality materials, the DED8845 withstands corrosion and heavy outdoor use. The maximum head of 10 meters allows you to pump water from great depths with remarkable ease. Its ergonomic design includes a sturdy carrying handle, making installation and transportation to any desired work location quick and easy.

Specifications

  • Power: 1000 W

  • Maximum Flow Rate: 19,500 L/h

  • Maximum Head: 10 m

  • Maximum Submersion Depth: 7 m

  • Maximum Particle Diameter: 35 mm

  • Protection Rating: IPX8

  • Cable Length: 10 m

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Waste Water / Sewage, Rainwater

Type

Waste Water / Sewage

Waste water / sewage pumps are used for pumping and transporting waste water, sewage, and other liquids containing solids or particles
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Horsepower
1.33 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
997.5 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
10 m

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
Yes

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
10 m

Maximum Head Height: 10


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Maximum Output
19.5 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Pump Submersion Depth
7 m
Maximum Particle Size
35 mm

Maximum Particle Size

Specifies the largest size of solid particles (such as sand, stones, or other impurities) that the device can pump without clogging or being damaged.
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

Those users who have this product can help you

Ask for the product

Description & Specifications

Take advantage of the specially reinforced impeller of the DED8845, which allows the passage of solid particles up to 35 millimeters in diameter without blockages.

At a glance

  • Power 1000W: High performance for demanding drainage tasks.

  • Flow Rate 19,500 L/h: Rapid evacuation of large volumes of water.

  • Particle Diameter 35mm: Suitable for heavily contaminated water.

  • Thermal Protection: Mechanism to prevent motor overheating.

Dual Functionality and Power

The Dedra DED8845 pump is designed to meet all your needs, whether for clean or dirty water. With its powerful 1000W motor, you are ensured consistent performance even in tough conditions. Its ability to handle wastewater with solid particles makes it an essential multi-tool for your home or garden, providing you with the necessary reliability for every application.

Automated Operation and Safety

The device features a built-in float switch, which automatically regulates the start and stop of operation depending on the water level. This technology protects your pump from running dry, which could cause damage to the motor. Thus, you can leave it to work autonomously in the sump without needing constant supervision from your side.

Durable Construction and Performance

Made from high-quality materials, the DED8845 withstands corrosion and heavy outdoor use. The maximum head of 10 meters allows you to pump water from great depths with remarkable ease. Its ergonomic design includes a sturdy carrying handle, making installation and transportation to any desired work location quick and easy.

Specifications

  • Power: 1000 W

  • Maximum Flow Rate: 19,500 L/h

  • Maximum Head: 10 m

  • Maximum Submersion Depth: 7 m

  • Maximum Particle Diameter: 35 mm

  • Protection Rating: IPX8

  • Cable Length: 10 m

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Waste Water / Sewage, Rainwater

Type

Waste Water / Sewage

Waste water / sewage pumps are used for pumping and transporting waste water, sewage, and other liquids containing solids or particles
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Horsepower
1.33 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
997.5 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
10 m

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
Yes

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
10 m

Maximum Head Height: 10


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Maximum Output
19.5 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Pump Submersion Depth
7 m
Maximum Particle Size
35 mm

Maximum Particle Size

Specifies the largest size of solid particles (such as sand, stones, or other impurities) that the device can pump without clogging or being damaged.
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

99,71 €
7,50 € to a Skroutz Point
or   8,50 €   shipping cost