The Tce Neos Series N2415 battery charger is designed for on-board charging and is used in industrial vacuum cleaners and other industrial machinery. Its high-frequency technology monitors the charging cycle, and the charger is suitable for WET, GEL and AGM batteries, depending on the programmed charging curve.
The metal housing also acts as a heat sink, while the fan is protected by a safety grille. The LED indicator shows the charging status: red for 0%–79%, yellow for 80%–99% and green for a full charge. It includes protection against overheating, reverse polarity and short circuits, as well as automatic shutoff when charging is complete.
- Type: Battery charger
- Application: Vacuum cleaner
- Voltage: 24 V
- Charging current: 15 A
- Technology: High-frequency
- Battery types: WET, GEL, AGM
- Protection rating: IP67
- Efficiency: Up to 94%
- Operating noise: Up to 45 dB
- Operating temperature: From -30 °C to +65 °C
- LED indicators: Red 0%–79%, yellow 80%–99%, green 100%
- Protections: Against overheating, reverse polarity and short circuits
- Functions: Automatic charging shutoff, fault diagnosis, PFC and soft start
- Housing: Metal, with heat-sink function
- Product Number
- N2415
- Product Type
- Chargers
- Diameter
- -
- Application
- Vacuum Cleaner
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.