Multi-Purpose Waterproofing Membrane

High elasticity membrane that protects against atmospheric conditions and UV rays, resistant to the corrosive effects of many acids.

Features:

• Liquid waterproofing membrane for vertical and horizontal surfaces.
• Ideal for areas where traditional membranes or flame-based systems are not feasible.
• Odorless, non-flammable, non-toxic, and solvent-free.
• Does not crack at low temperatures and does not run at high temperatures.
• Allows the creation of a sealed bonding base for tile installation with cementitious adhesives (category C according to EN 12004).
• If diluted at 50%, it can be used as a surface preparation for dust control.
• Excellent adhesion to concrete, asphalt membranes, metals, fiber cement, plasterboard, wood, ceramics, and glass.

Usage instructions:

• Surfaces should be clean, solid, dry or slightly moist (without standing water).
• Mix the product thoroughly before use.
• Apply with roller, brush, spray, or trowel in two coats.
• For large surfaces, it can be diluted with water up to 10%.
• The second coat is applied when the first is dry or after complete drying (24–48 hours).
• Tools are easily cleaned with water.

Warnings:

• Apply at temperatures above +5°C.
• Avoid rain, fog, frost, and extreme weather conditions.