Sunlu PLA+ filament for 3D printers has a tensile strength of 64 MPa and an IZOD impact strength (X-Y) of 3.5 kJ/m². Its consistent diameter and dimensional accuracy of ±0.02 mm help ensure smooth feeding, while low shrinkage and interlayer adhesion support stable prints.

It is compatible with FDM 3D printers that accept 1.75 mm filament. Recommended printing speeds are 50–100 mm/s at 195–205 °C or 100–300 mm/s at 205–220 °C.

• Material: PLA+
• Color: Black
• Diameter: 1.75 mm
• Weight: 1 kg
• Packaging: Spool
• Dimensional accuracy: ±0.02 mm
• Density: 1.23 g/cm³
• Vicat softening temperature: 54 °C
• Heat deflection temperature (HDT): 53 °C
• Melting temperature: 164 °C
• Melt flow rate: 6.3 g/10 min
• Tensile strength: 64 MPa
• Elongation at break: 17 %
• Flexural strength: 86 MPa
• Modulus of elasticity: 2907 MPa
• IZOD impact strength (X-Y): 3.5 kJ/m²