MasterDesk PRO 100W Built-in Nail Dust Collector - LUXORISE is designed to effectively collect dust particles produced during the filing process of gels, polygel, or semi-permanent nail polish. The collector is perfectly integrated into the manicure table surface, offering fast and efficient suction of residues, thus keeping the workspace clean and hygienic.

• Model: LUX-100MD PRO
• Power: 100 W
• Speed: 4500 RPM
• Suction Capacity: 540 m³/h
• Power Supply: 220-240V 50Hz
• Output Capacity: 12V 8.5A
• Dimensions: 40 x 28 x 7 cm
• Dimensions (with arms attached): 58 x 28 x 7 cm
• Weight: 1730 g

Package Contents:

• 1 x Nail dust collector
• 1 x Adapter with power cable
• 1 x User manual
• 1 x Protective grill
• 2 x Support arms
• 2 x Filters
• Mounting screws

Instructions for Use:

• Integrate the collector into the worktable.
• Plug the adapter into the socket.
• Place the filter into the designated slot and press one or both ON/OFF buttons to start the collector. The suction power is higher when both buttons are pressed.
• For optimal performance, clean or replace the filter regularly.

Protective Grill Installation:

• Cut a 17 cm diameter circle, 3 mm deep, into the surface of the table.
• To prevent the grill from passing through the table surface, create a second, smaller circle (16 cm diameter) that goes through the entire thickness of the table surface.

Collector Installation:

• Secure the collector under the table with 8 screws, then attach the two support arms to the collector and fasten each to the table with 4 screws.
• The collector filter should be placed directly under the installed grill.

Cleaning Instructions:

• It is recommended to clean the filter after 2-3 manicures.
• Use a soft brush to clean the surface of the filter or use a blower (with cold air) to blow from behind the filter. Cleaning with water is not recommended as it may damage the filter.
• Replace the filter with a new one when the suction capacity decreases (approximately every 3 months, depending on frequency of use).