Skroutz.cy

Anavalos Astra N Waste Water And Rainwater Pump with Float Switch N552F
Submersible Water Pumps

Anavalos Astra N Waste Water And Rainwater Pump with Float Switch N552F

Key features:

  • Flow rate 11 m3/h & height 8.5m
  • Automatic level sensor
  • Body made of durable technopolymer
  • Submersion up to 7m with 10m cable

Pump wastewater up to 11 m3/h with the Astra N 552F. With automatic operation and IP68 protection, you can quickly and safely dry basements and pits!

See full description

  • Manometric Height

    8.5

    The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

    • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
    • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
  • See all
127 90 €
Delivery Thu, 16 Jul - Mon, 20 Jul
7,50 € to a Skroutz Point or 8,50 € to an address
Do you want it with 2,50 € shipping to Skroutz Point?
Sent from Greece
From E-Anastasiadis 5.0 (4)
5.0 (4 reviews)
Greece
1 piece
See Water Pumps on the page of E-Anastasiadis
What if it breaks?

You have at least a 2-year warranty. Contact us by phone and we will immediately take care of the repair, replacement or refund of your money, completely free of charge.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Review the product
Product report

Description

Description

At a glance

  • High Flow Rate: Transfers up to 11 m3/h of dirty water at high speed.
  • Automatic Start: The electronic sensor starts pumping at 120mm.
  • IP68 Resistance: Submerge it safely up to 7 meters with complete waterproofing.
  • Multi-connection: Easily fit G1”, G1-1/4” or G1-1/2” pipes.
  • Thermal Protection: Operate safely thanks to the built-in protection.

Performance and Automatic Operation

You will find that the Astra N 552F is the ideal ally for draining flooded areas. With a flow rate reaching 11 m3/h and a head height of 8.5m, you can empty pits and tanks in no time. The automatic level sensor takes care of the job for you, starting the pumping at 120mm and stopping as soon as the level drops to 5mm.

Quality Construction and Durability

You will appreciate the lightweight yet sturdy construction made of technopolymer that makes transporting the pump a breeze. The shaft made of AISI 304 stainless steel and the thermal protection guarantee long-term use without problems. It is designed to withstand mild industrial and household use, removing particles up to 5mm with absolute reliability.

Flexibility and Ease of Use

You have at your disposal a 10-meter cable that offers you great freedom of movement, even in deep wells. The multi-connection nozzle allows you to connect different types of pipes effortlessly, while the side outlet facilitates installation in tight spaces. Whether it's your garage or underground areas, this pump will provide you with the solution you are looking for.

Technical Specifications:

  • Flow Rate: Up to 11 m3/h
  • Head Height: Up to 8.5 m
  • Maximum Pressure: 0.8 bar
  • Submersion Depth: Up to 7 m
  • Start/Stop Level: 120mm / 5mm
  • Particle Passage: Up to 5 mm
  • Liquid Temperature: Max 35°C
  • Motor: IP68 / Class F
  • Cable: 10m HO5RN-F

What’s included in the package:

  • Submersible pump Astra N 552F
  • 10-meter power cable
  • Multi-connection nozzle G1”, G1-1/4”, G1-1/2”
  • Instruction manual

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Waste Water / Sewage, Engine, Rainwater

Type

Waste Water / Sewage

Waste water / sewage pumps are used for pumping and transporting waste water, sewage, and other liquids containing solids or particles
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Cable Length
10 m

Features

Electronic Level Sensor
Yes

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
Yes

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
8.5 m

Maximum Head Height: 8.5


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Maximum Output
11 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Pump Submersion Depth
7 m
Maximum Particle Size
5 mm

Maximum Particle Size

Specifies the largest size of solid particles (such as sand, stones, or other impurities) that the device can pump without clogging or being damaged.
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
Yes
Protection Certification
IP68

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

1 user has this product and can help you

Ask for the product

Description & Specifications

At a glance

  • High Flow Rate: Transfers up to 11 m3/h of dirty water at high speed.
  • Automatic Start: The electronic sensor starts pumping at 120mm.
  • IP68 Resistance: Submerge it safely up to 7 meters with complete waterproofing.
  • Multi-connection: Easily fit G1”, G1-1/4” or G1-1/2” pipes.
  • Thermal Protection: Operate safely thanks to the built-in protection.

Performance and Automatic Operation

You will find that the Astra N 552F is the ideal ally for draining flooded areas. With a flow rate reaching 11 m3/h and a head height of 8.5m, you can empty pits and tanks in no time. The automatic level sensor takes care of the job for you, starting the pumping at 120mm and stopping as soon as the level drops to 5mm.

Quality Construction and Durability

You will appreciate the lightweight yet sturdy construction made of technopolymer that makes transporting the pump a breeze. The shaft made of AISI 304 stainless steel and the thermal protection guarantee long-term use without problems. It is designed to withstand mild industrial and household use, removing particles up to 5mm with absolute reliability.

Flexibility and Ease of Use

You have at your disposal a 10-meter cable that offers you great freedom of movement, even in deep wells. The multi-connection nozzle allows you to connect different types of pipes effortlessly, while the side outlet facilitates installation in tight spaces. Whether it's your garage or underground areas, this pump will provide you with the solution you are looking for.

Technical Specifications:

  • Flow Rate: Up to 11 m3/h
  • Head Height: Up to 8.5 m
  • Maximum Pressure: 0.8 bar
  • Submersion Depth: Up to 7 m
  • Start/Stop Level: 120mm / 5mm
  • Particle Passage: Up to 5 mm
  • Liquid Temperature: Max 35°C
  • Motor: IP68 / Class F
  • Cable: 10m HO5RN-F

What’s included in the package:

  • Submersible pump Astra N 552F
  • 10-meter power cable
  • Multi-connection nozzle G1”, G1-1/4”, G1-1/2”
  • Instruction manual

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Waste Water / Sewage, Engine, Rainwater

Type

Waste Water / Sewage

Waste water / sewage pumps are used for pumping and transporting waste water, sewage, and other liquids containing solids or particles
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Cable Length
10 m

Features

Electronic Level Sensor
Yes

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
Yes

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
8.5 m

Maximum Head Height: 8.5


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Maximum Output
11 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Pump Submersion Depth
7 m
Maximum Particle Size
5 mm

Maximum Particle Size

Specifies the largest size of solid particles (such as sand, stones, or other impurities) that the device can pump without clogging or being damaged.
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
Yes
Protection Certification
IP68

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

127,90 €
7,50 € to a Skroutz Point
or   8,50 €   shipping cost