Skroutz.cy

Anavalos Astra N Waste Water And Rainwater Pump with Float Switch N401F
Submersible Water Pumps

Anavalos Astra N Waste Water And Rainwater Pump with Float Switch N401F

Key features:

  • Suction from a 5mm level
  • Flow rate up to 7 m3/h
  • Head height up to 7m
  • Body made of technopolymer

Submerge the Astra N 401F in wells or basements. Equipped with a level and pressure sensor at 0.8 bar, it easily and reliably removes dirty water.

See full description

  • Manometric Height

    7

    The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

    • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
    • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
  • See all
109 60 €
110 Coins 110 Coins
Delivery Mon, 20 Jul - Wed, 22 Jul
7,50 € to a Skroutz Point or 8,50 € to an address
Do you want it with 2,50 € shipping to Skroutz Point?
Sent from Greece
From E-Anastasiadis 5.0 (4)
5.0 (4 reviews)
Greece
1 piece
See Water Pumps on the page of E-Anastasiadis
What if it breaks?

You have at least a 2-year warranty. Contact us by phone and we will immediately take care of the repair, replacement or refund of your money, completely free of charge.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Review the product
Product report

Description

Description

At a glance

  • Low Water Level: Starts from 5mm and stops at 1mm for complete drainage.
  • High Flow Rate: Moves up to 7 m3/h of dirty water quickly and efficiently.
  • IP68 Protection: Fully sealed motor for safe submersion up to 7 meters.
  • Multiple Outlet: Connects G1", G1-1/4" or G1-1/2" for maximum compatibility.
  • Long Cable: Comes with a 10-meter cable for easy access to any point.

Performance and Low Water Level

You will be impressed by the Astra N 401F's ability to start pumping from just 5mm and stop at 1mm. It is the perfect solution for drying flooded basements, garages, or pits with absolute precision, removing particles up to 5mm in size without any problem.

High-Quality and Lightweight Construction

You will appreciate the lightweight body made of technopolymer and the stainless steel base that ensure durability over time and easy portability. The pump features thermal protection and an integrated check valve, providing you with confidence and safety for every household or light industrial use.

Flexibility and Automatic Operation

You can choose between manual or automatic operation thanks to the built-in adjustable electronic level sensor. The multi-connection nozzle allows you to adapt the pump to different pipe sizes, making installation in tanks or underground reservoirs a simple process for you.

Technical Specifications:

  • Maximum Flow Rate: 7 m3/h
  • Head Height: Up to 7 m
  • Maximum Pressure: 0.8 bar
  • Submersion Depth: Up to 7 m
  • Fluid Temperature: Max 35°C
  • Particle Passage: Up to 5 mm
  • Power Cable: 10m (H05RN-F)
  • Motor Protection: IP68 / Class F
  • Materials: Thermoplastic and stainless steel AISI 304

What’s included in the package:

  • Submersible pump Astra N 401F
  • Power cable 10 meters
  • Multi-connection nozzle G1" / G1-1/4" / G1-1/2"
  • Built-in check valve

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Waste Water / Sewage, Engine, Rainwater

Type

Waste Water / Sewage

Waste water / sewage pumps are used for pumping and transporting waste water, sewage, and other liquids containing solids or particles
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Cable Length
10 m

Features

Electronic Level Sensor
Yes

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
Yes

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
7 m

Maximum Head Height: 7


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Maximum Output
7 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Pump Submersion Depth
7 m
Maximum Particle Size
5 mm

Maximum Particle Size

Specifies the largest size of solid particles (such as sand, stones, or other impurities) that the device can pump without clogging or being damaged.
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
Yes
Protection Certification
IP68

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

Those users who have this product can help you

Ask for the product

Description & Specifications

At a glance

  • Low Water Level: Starts from 5mm and stops at 1mm for complete drainage.
  • High Flow Rate: Moves up to 7 m3/h of dirty water quickly and efficiently.
  • IP68 Protection: Fully sealed motor for safe submersion up to 7 meters.
  • Multiple Outlet: Connects G1", G1-1/4" or G1-1/2" for maximum compatibility.
  • Long Cable: Comes with a 10-meter cable for easy access to any point.

Performance and Low Water Level

You will be impressed by the Astra N 401F's ability to start pumping from just 5mm and stop at 1mm. It is the perfect solution for drying flooded basements, garages, or pits with absolute precision, removing particles up to 5mm in size without any problem.

High-Quality and Lightweight Construction

You will appreciate the lightweight body made of technopolymer and the stainless steel base that ensure durability over time and easy portability. The pump features thermal protection and an integrated check valve, providing you with confidence and safety for every household or light industrial use.

Flexibility and Automatic Operation

You can choose between manual or automatic operation thanks to the built-in adjustable electronic level sensor. The multi-connection nozzle allows you to adapt the pump to different pipe sizes, making installation in tanks or underground reservoirs a simple process for you.

Technical Specifications:

  • Maximum Flow Rate: 7 m3/h
  • Head Height: Up to 7 m
  • Maximum Pressure: 0.8 bar
  • Submersion Depth: Up to 7 m
  • Fluid Temperature: Max 35°C
  • Particle Passage: Up to 5 mm
  • Power Cable: 10m (H05RN-F)
  • Motor Protection: IP68 / Class F
  • Materials: Thermoplastic and stainless steel AISI 304

What’s included in the package:

  • Submersible pump Astra N 401F
  • Power cable 10 meters
  • Multi-connection nozzle G1" / G1-1/4" / G1-1/2"
  • Built-in check valve

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Waste Water / Sewage, Engine, Rainwater

Type

Waste Water / Sewage

Waste water / sewage pumps are used for pumping and transporting waste water, sewage, and other liquids containing solids or particles
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Cable Length
10 m

Features

Electronic Level Sensor
Yes

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
Yes

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
7 m

Maximum Head Height: 7


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Maximum Output
7 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Pump Submersion Depth
7 m
Maximum Particle Size
5 mm

Maximum Particle Size

Specifies the largest size of solid particles (such as sand, stones, or other impurities) that the device can pump without clogging or being damaged.
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
Yes
Protection Certification
IP68

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

109,60 €
7,50 € to a Skroutz Point
or   8,50 €   shipping cost