SensoPRO Milano Rose Touch Traditional Waxing Set, 1 Kg, which includes the following products:

• 1 x Pro Wax 100 SensoPRO Milano Wax and Paraffin Heater, with a capacity of 500 ml and adjustable thermostat.
• 1 x SensoPRO Milano Traditional Wax Box, Rose Touch, 1 Kg.
• 1 x SensoPRO Milano Post-Wax Oil, which moisturizes the skin and reduces inflammation, 100 ml.
• 10 x Wooden spatulas for wax application, very useful for waxing.

Instructions for Use:

1. Place the heater on a flat, heat-resistant surface.
2. Make sure the heater switch is in the OFF position, then plug in the heater.
3. Cut the wax into pieces and place them in the heater's tank. Heat the wax until fully melted, using medium temperature. Stir occasionally to check the texture; the wax is ready to apply when it becomes creamy.
4. Set the heater to maximum temperature using the switch and heat the wax until completely melted, then maintain it at medium temperature. Stir occasionally to check its condition. The wax is ready to apply when it becomes creamy.
5. Ensure the wax temperature is comfortable for your skin. You can test on a small area to avoid burns.
6. Start by cleaning the skin with SensoPRO Milano Pre-Wax lotion. Make sure the skin is completely dry before applying the wax.
7. Use a spatula to apply the wax in the direction of hair growth, wait a few seconds for the wax to harden, and then quickly pull it off against the direction of hair growth.
8. Apply the Post-Wax Oil to remove wax residues and reduce redness and irritated skin. Avoid sun exposure or hot baths for a few hours after waxing to prevent further irritation.
9. After use, unplug the heater and clean it to remove any wax residues.

Warning: Wax and paraffin are for external use only. Do not apply on sensitive, damaged, or delicate skin areas. Keep out of reach of children. Avoid overheating. Heating should be done carefully. WARNING: very hot, may cause burns!

Storage Conditions: Do not leave the product (wax or paraffin) open and inactive for long periods. Store in cool, dry, and ventilated places, away from direct sunlight, moisture, aggressive materials, and potential impacts, scratches, or deformations.