Skroutz.cy

DAB Single-Phase Waste Water Sewage Pump 1.33hp
Submersible Water Pumps

DAB Single-Phase Waste Water Sewage Pump 1.33hp

Key features:

  • Grinder: Grinding System
  • AISI 630: Stainless Steel Cutters
  • IP68: Waterproof
  • 25m: High Head

It features an advanced cutter system made of AISI 630 hardened steel, ensuring complete grinding of solids in urban wastewater.

See full description

Top specs

  • Horsepower

    Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).

  • Voltage

    Single-Phase

    Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 

  • Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

  • Manometric Height

    25

    The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

    • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
    • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
  • See all
850 00 €
850 Coins 850 Coins
Delivery Fri, 28 Aug - Tue, 01 Sep
73,00 € shipping cost
Do you want it with 68,00 € shipping?
Sent from Greece
From Lamas
Greece
2 pieces
See Water Pumps on the page of Lamas
What if it breaks?

You're covered by the statutory 2-year warranty. Contact us and we'll handle the entire process with the store, ensuring your issue is resolved with prompt support through a repair, replacement, or refund.

What if I change my mind?

No problem, as long as it's within 14 days. We'll come pick it up or you can choose the Skroutz Point that suits you, completely free for up to 2 times per year, and we'll refund your money. Get Skroutz Plus to enjoy unlimited free returns.

Learn more about invoicing
Review the product
Product report

Description

Description

At a glance

  • Cutting System: Powerful cutters for handling wastewater with solid bodies.
  • Cast Iron Construction: Body and impeller made of cast iron for maximum durability.
  • Automatic Operation: Built-in float switch for autonomous control.
  • EN Certification: Compliance with EN 12050-1 standard for urban installations.

Grinding Technology and Power

It is designed to perform under the most demanding drainage conditions. The 1.34HP motor combined with the open-type impeller and the cutters made of AISI 630 stainless steel effectively pulverize solid objects contained in the wastewater. This allows you to use smaller diameter pipes without the risk of blockages in the system.

Reliability and Continuous Operation

The build quality of DAB guarantees long-term trouble-free use, as it features a double mechanical seal for complete motor waterproofing. The ability to operate dry for up to 10 minutes provides an additional safety margin, while the asynchronous continuous operation motor is class F insulated, ensuring stable performance even in demanding commercial applications.

Ease of Installation and Maintenance

Whether you choose free-standing installation or use with guides, the FEKA VS GRINDER perfectly adapts to your space. Its design allows quick access to internal parts, making maintenance a simple process. It comes with an external panel that includes thermal protection and the capacitor, offering you a complete and safe pumping system.

Specifications

  • Power: 1000W - 1.34HP
  • Voltage: 1~230V (Single-phase)
  • Maximum Head: 25m
  • Maximum Flow Rate: 14 m³/h
  • Outlet: 1 1/2" internal thread
  • Protection Rating: IP68
  • Blade Material: Stainless steel AISI 630
  • Weight: 23kg

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Waste Water / Sewage

Type

Waste Water / Sewage

Waste water / sewage pumps are used for pumping and transporting waste water, sewage, and other liquids containing solids or particles
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
1.34 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
1005 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
1 1/2"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
25 m

Maximum Head Height: 25


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Maximum Output
14 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
No
Protection Certification
IP68

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

Those users who have this product can help you

Ask for the product

Description & Specifications

At a glance

  • Cutting System: Powerful cutters for handling wastewater with solid bodies.
  • Cast Iron Construction: Body and impeller made of cast iron for maximum durability.
  • Automatic Operation: Built-in float switch for autonomous control.
  • EN Certification: Compliance with EN 12050-1 standard for urban installations.

Grinding Technology and Power

It is designed to perform under the most demanding drainage conditions. The 1.34HP motor combined with the open-type impeller and the cutters made of AISI 630 stainless steel effectively pulverize solid objects contained in the wastewater. This allows you to use smaller diameter pipes without the risk of blockages in the system.

Reliability and Continuous Operation

The build quality of DAB guarantees long-term trouble-free use, as it features a double mechanical seal for complete motor waterproofing. The ability to operate dry for up to 10 minutes provides an additional safety margin, while the asynchronous continuous operation motor is class F insulated, ensuring stable performance even in demanding commercial applications.

Ease of Installation and Maintenance

Whether you choose free-standing installation or use with guides, the FEKA VS GRINDER perfectly adapts to your space. Its design allows quick access to internal parts, making maintenance a simple process. It comes with an external panel that includes thermal protection and the capacitor, offering you a complete and safe pumping system.

Specifications

  • Power: 1000W - 1.34HP
  • Voltage: 1~230V (Single-phase)
  • Maximum Head: 25m
  • Maximum Flow Rate: 14 m³/h
  • Outlet: 1 1/2" internal thread
  • Protection Rating: IP68
  • Blade Material: Stainless steel AISI 630
  • Weight: 23kg

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Waste Water / Sewage

Type

Waste Water / Sewage

Waste water / sewage pumps are used for pumping and transporting waste water, sewage, and other liquids containing solids or particles
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
1.34 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
1005 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
1 1/2"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
25 m

Maximum Head Height: 25


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Maximum Output
14 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
No
Protection Certification
IP68

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

850,00 €
73,00 € 78,00 €   shipping cost