The Vtools General-Purpose Electronic Components Kit is suitable for various platforms such as Arduino, ESP, Raspberry Pi, and for projects involving LED indicators and flashing lights. It includes the following components:

• 40-pin 2.54 mm straight header: 1 piece
• Splittable contact field without soldering: 1 piece
• Flexible jumper wires: 65 pieces
• Small plastic box 14.5 × 8.8 × 4 cm: 1 piece
• 5 mm red LED: 10 pieces
• 5 mm green LED: 10 pieces
• 5 mm yellow LED: 10 pieces
• 5 mm blue LED: 10 pieces
• 5 mm RGB LED: 2 pieces
• Round cover for square switch 12×12×7.3 mm red: 2 pieces
• Round cover for square switch 12×12×7.3 mm blue: 2 pieces
• Round cover for square switch 12×12×7.3 mm green: 2 pieces
• Round cover for square switch 12×12×7.3 mm yellow: 2 pieces
• Micro switch 12x12mm v-7.3mm: 8 pieces
• Active buzzer 5 V: 1 piece
• Passive buzzer 5 V: 1 piece
• Potentiometer 10 kΩ, shaft 6mm: 1 piece
• Resistor 1 kΩ, 1/4 W, 1%: 10 pieces
• Resistor 10 kΩ, 1/4 W, 1%: 10 pieces
• Resistor 220 Ω, 1/4 W, 1%: 10 pieces
• Resistor 100 kΩ, 1/4 W, 1%: 10 pieces
• Resistor 100 Ω, 1/4 W, 1%: 10 pieces
• Resistor 330 Ω, 1/4 W, 1%: 10 pieces
• Resistor 4.7 kΩ, 1/4 W, 1%: 10 pieces
• Resistor 47 kΩ, 1/4 W, 1%: 10 pieces
• Ceramic capacitor 100 pF: 10 pieces
• Ceramic capacitor 10 nF: 10 pieces
• Ceramic capacitor 100 nF: 10 pieces
• Ceramic capacitor 3 pF: 10 pieces
• Electrolytic capacitor 470 µF 50 V: 10 pieces
• Electrolytic capacitor 10 µF 50 V: 10 pieces