Skroutz.cy

Akyga Li-Po Battery 3.7V 2000mAh 1S for RC Vehicle
Batteries for Drones & RC Vehicles

Akyga Li-Po Battery 3.7V 2000mAh 1S for RC Vehicle Code: LP674261

The AKY0640 lithium-polymer battery is a high-performance power source. It includes a PCM protection circuit with two 50mm wires and a Molex 5264, 2-pin connector. It has a capacity of 2000mAh and a...

The AKY0640 lithium-polymer battery is a high-performance power source. It includes a PCM protection circuit with two 50mm wires and a Molex 5264, 2-pin connector. It has a capacity of 2000mAh and a nominal voltage of 3.7V. The PCM protection ensures battery safety against overcharge, over-discharge, and short circuit.

The battery complies with RoHS, MSDS,...

See full description See full description

Top specs

  • Voltage 3.7 V
  • Capacity 2000 mAh

  • Cells

    The individual elements (cells) that are connected in series to provide the desired voltage (Volt). For example, a "3S" battery contains 3 connected Lithium cells inside. More cells mean higher voltage and usually greater power.
  • See all
The product is not available for shipping to the selected country.
Review the product
Product report

Description

Description

The AKY0640 lithium-polymer battery is a high-performance power source. It includes a PCM protection circuit with two 50mm wires and a Molex 5264, 2-pin connector. It has a capacity of 2000mAh and a nominal voltage of 3.7V. The PCM protection ensures battery safety against overcharge, over-discharge, and short circuit.

The battery complies with RoHS, MSDS, and CE certifications.

  • Product code: AKY0640
  • Manufacturer code: LP674261
  • Product type: Lithium-polymer battery
  • Voltage: 3.7 V
  • Capacity: 2000 mAh
  • Protection: PCM
  • Thickness: 6.7 mm
  • Width: 42 mm
  • Height: 61 mm
  • Connector type: Molex 5264, 2 pins
  • Cable length: 50 mm
  • Product dimensions (L x W x H): 61 x 42 x 6.7 mm
  • Gross weight: 34 g
  • CE compliance: Yes
  • RoHS compliance: Yes
  • MSDS compliance: Yes
  • EAN code: 5906574243605

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Number
LP674261

Dimensions

Battery Type
Li-Po

Battery Type

Li-Po
They offer more charging cycles like Li-ion batteries, with the difference that they are lighter and have less risk of leakage, but lower capacity.
Application
RC Vehicle
Capacity
2000 mAh
Voltage
3.7 V
Number of Cells
1S

Number of Cells

The individual elements (cells) that are connected in series to provide the desired voltage (Volt). For example, a "3S" battery contains 3 connected Lithium cells inside. More cells mean higher voltage and usually greater power.
Plug Type
-
Discharge Rate
-

Discharge Rate

The discharge rate, also known as the C-Rating, indicates how quickly the battery can safely deliver its current without overheating or swelling. The values you see refer to continuous discharge, that is, the maximum current the battery can provide steadily and safely throughout its operation without overheating. There is also burst discharge, which is the maximum "burst" of current the battery can withstand for a few seconds (usually 3-5s) to cover sudden accelerations.

Compatibility

DJI Compatibility
-

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications
Questions

Questions

Do you have a question about the product?

1 user has this product and can help you

Ask for the product

Description & Specifications

The AKY0640 lithium-polymer battery is a high-performance power source. It includes a PCM protection circuit with two 50mm wires and a Molex 5264, 2-pin connector. It has a capacity of 2000mAh and a nominal voltage of 3.7V. The PCM protection ensures battery safety against overcharge, over-discharge, and short circuit.

The battery complies with RoHS, MSDS, and CE certifications.

  • Product code: AKY0640
  • Manufacturer code: LP674261
  • Product type: Lithium-polymer battery
  • Voltage: 3.7 V
  • Capacity: 2000 mAh
  • Protection: PCM
  • Thickness: 6.7 mm
  • Width: 42 mm
  • Height: 61 mm
  • Connector type: Molex 5264, 2 pins
  • Cable length: 50 mm
  • Product dimensions (L x W x H): 61 x 42 x 6.7 mm
  • Gross weight: 34 g
  • CE compliance: Yes
  • RoHS compliance: Yes
  • MSDS compliance: Yes
  • EAN code: 5906574243605

Manufacturer

Manufacturer Details

Warnings & Safety Information
Product Number
LP674261

Dimensions

Battery Type
Li-Po

Battery Type

Li-Po
They offer more charging cycles like Li-ion batteries, with the difference that they are lighter and have less risk of leakage, but lower capacity.
Application
RC Vehicle
Capacity
2000 mAh
Voltage
3.7 V
Number of Cells
1S

Number of Cells

The individual elements (cells) that are connected in series to provide the desired voltage (Volt). For example, a "3S" battery contains 3 connected Lithium cells inside. More cells mean higher voltage and usually greater power.
Plug Type
-
Discharge Rate
-

Discharge Rate

The discharge rate, also known as the C-Rating, indicates how quickly the battery can safely deliver its current without overheating or swelling. The values you see refer to continuous discharge, that is, the maximum current the battery can provide steadily and safely throughout its operation without overheating. There is also burst discharge, which is the maximum "burst" of current the battery can withstand for a few seconds (usually 3-5s) to cover sudden accelerations.

Compatibility

DJI Compatibility
-

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.