Double Zebra Roller Blinds
Recommended measurement instructions:
- Above the window: Add 15 cm to the total height of the window and 20 cm to the total width. The fabric width will be 3.5 cm less than the overall roller width due to the mechanism.
- Inside the window recess: Measure the internal dimensions of the recess and subtract 1 cm from the right and left sides to prevent the roller from touching the surfaces of the recess as it moves.
If the window opens inward, the roller can only be installed inside the frame if there is space between the opening window and the top of the frame. Otherwise, the roller must be mounted above the frame on the wall. If the window is sliding, there is no problem.
Handle position (chain): The position of the handle is a matter of personal preference. Just make sure it does not obstruct movement by any object.
Wrapping direction: Whether the wrapping is done in Method A or Method B depends on whether there is a recess that prevents the vertical movement of the fabric.
Notes:
- The color you see on your screen may differ slightly from that of the fabric.
- The fabric width is 3.5 cm less than the total width of the roller due to the mechanism.
- The weighted end of the fabric is covered with the same fabric as the roller.
- Total packaging weight: approximately 2 kg.
Specifications
- Pattern
- Monochrome
- Colour
- -
- Blackout
- Partial Blackout
- Double
- Yes
Dimensions
- Dimension
- 100x200 cm
- Width
- 100 cm
- Height
- 200 cm
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.